Capillary pressure curves are represented by the equation Pc=a / (Sw-Swi)b. It is shown that for the Leverett J-function to produce a single correlation, the tortuosity, the irreducible water saturation and the saturation exponent b must be the same for the different formations. A modified capillary pressure function J* is introduced that incorporates the tortuosity and irreducible water saturation in its definition. The modified function is correlated with the normalized saturation SD so that all curves will have their vertical asymptotes at a single point SD=0. The modified function represents a significant impro- vement over the original one since it is now sufficient to have the value of the saturation exponent b be the same for two samples to get the same correlation. This was verified by analyzing data from the literature and comparing the two correlations. A modified linear regression by means of weighted least squares method is used to fit the experimental capillary pressure data. Data sets from different sources were analyzed. It was found that a good single correlation can be obtained for samples from the same formation but the correlations were different for different formations.

Keywords:
permeability, capillary pressure, capillary pressure j-function spe 29890, well logging, fluid dynamics, flow in porous media, saturation, upstream oil & gas, capillary pressure curve, capillary pressure data
Subjects:
Reservoir Characterization, Reservoir Fluid Dynamics, Improved and Enhanced Recovery, Formation Evaluation & Management, Flow in porous media, Open hole/cased hole log analysis
Copyright 1995, Society of Petroleum Engineers
You can access this article if you purchase or spend a download.