... field resources. Traditionally, surveillance operations have relied on three main pillars: data acquisition and transmission hardware; a user interface system to visualize data, accessed through servers on the premises or a webpage; and engineers in charge of interpreting data and making decisions from...

... artificial lift system optimization operation sucker rod pump beam pumping motor v-belt transmission algorithm upstream oil & gas gearbox mover shaft reduction efficiency sheave torque surface pm motor drive consumption pmm Technology Background Traditional sucker...

...) and a stationary diffuser. Kinetic energy is imparted to the fluid by the rotors, and the kinetic energy is later converted to pressure head by the diffusers. For liquid pumping operations, the sum of the pressure rise of each stage is the total pressure rise or pressure boost by the ESP. ESPs operate...

... of artificial lift becomes necessity. Electrical submersible pump (ESP) is the most common type of device used in artificial lift systems in the oil industry to boost pressure in mature fields. ESPs are centrifugal pumps that operate under multiphase flow conditions and are positioned at the end...

... electrical connections Finally Saudi ARAMCO and Baker Hughes developed the TransCoil rigless-deployed ESP system to address the issues, help operators bring wells on production faster, and lower overall lifting costs to extend the economic life of producing assets. During the project both system design...

... Intelligent diagnostic engines for ESP surveillance can also provide remaining useful life prediction, which will provide operators with better ability to forecast ESP replacement and plan for workover replacement scheduling. This in turn reduces well downtime and production losses associated...

... of a high-speed high-rate slim ESP in 2019. It has a 3.5" OD motor and can operate at a nominal speed of 6000 RPM and produce up to 5000 BPD at the best efficiency point (BEP) ( Lastra, et al. 2019 ). The ESP uses a permanent magnet motor (PMM) and an inverted configuration ESP design. It went through...

... Abstract For the past year, drilling new wells is proving to be more uneconomical for operators due to the oil supply cut down, an agreement between Organization of the Petroleum Exporting Countries (OPEC) and OPEC+ countries, and survey and rig expenses. In such scenarios, artificial lift...

... after completing the drilling operations, using off-specs materials in well completion including casing strings, packers, etc. or below the design pressure rating. Other causes are the drilling programs and the well design which in some cases are not considering different formation lithology...

... the effect of accumulated gasses trapped in the annulus on the ESP cable. Based on the conclusions for each case, this paper will provide recommendations to enhance the equipment run life of the ESP system to avoid premature failures, gas lock and smooth operation for such cases. hydraulic fracturing...

... both. Figure 1 PMM Vs. Induction motor losses Let us understand the ESP selection to conduct the study in this paper. We undertook the first 4 sets of wells for PMM operation in this field. These four wells were broadly selected based on ESP operation along with an induction motor...

... A theoretical study to evaluate the performance of different housing sizes of high-speed gas handlers operating between 3500 RPM to 12000 RPM for intake GVF up to 75% was presented by Ejim (2020) . The work was performed by performing dimensionless analysis using data from HAPs operating at 3000...

... upstream oil & gas reservoir surveillance downhole intervention production enhancement artificial lift system operation dual esp completion production control ytool workover esp completion blpd pullout well intervention production monitoring upper esp pump offshore well...

... As this technology is still within operator's pilot application, Side Pocket Mandrels (SPM) are positioned 12ft below each DIAL unit as contingency/back-up in case there are issues with the valves or connectivity. However, all SPMs are fitted with dummy valves and well intervention...

... (ESP) was 100 psi, based on well stability and to keep the proper net positive suction head (NPSH). It was apparent early in the investigation that the current operating practices were a major contributor to the low PCP reliability. While new guidelines needed to be developed, increasing overall...

... occurred after water shut off operation, before electrical submersible pump installation, either well circulation should be done properly or other artificial lift method may be selected to take out remaing gel. In this study, motor failures owing to gel deposition on motor housing don't take into account...

... Abstract As the oil industry begins to emerge from one of the worst downturns in decades, companies need to operate in a market of unstable oil prices that the upstream oil and gas industry continues to face. New innovative, sustainable, and disruptive artificial lift technologies are the cost...

... remotely adjusting the operation parameters using the monitoring system. The result shows how real-time monitoring system improved ESP system run life and maximized oil production. In addition, we look into details how the monitoring system enhances overall ESP efficiency and reduces the number of trips...

... the objective is to maximising oil production. To mimic day-to-day operations, only continuous control variables are considered in this scenario: Well choke valves Well gas-lift injection rates When trying to determine optimal solutions, the optimisation algorithm is trying to get as close...

... actions. Upstream Oil & Gas pilot project real time system Downtime Camilleri KOC database Kuwait ESP Implementation artificial lift system ESP surveillance Engineer recommendation Surveillance Process Surveillance Engineer real-time surveillance operation surveillance center...