... productivity index heating cable visco-skin effect heating heating rate oil production reservoir property artificial intelligence completion installation and operations reservoir simulation cable position horizontal section pressure drop cable cable length application wellbore oil viscosity...

... distribution, and well performance history – to understand reservoir pressure and production behavior. Unstructured refined grid principles (Voronoi Grid) were applied to build a relatively small and simple model that considers all the required physics of the problem. The estimated reservoir properties from...

...Uncertainty Analysis of Reservoir Properties The primary objective of this experiment is to analyze the impact on main outputs of simulation model (Original Gas In Place, Recovery Factor, Gas and Condensate cumulative production) due to the range of variability from key fluid and reservoir...

... interpretation history reservoir property drillstem testing spe 139237 reservoir model upstream oil & gas algorithm derivative response early development phase pressure data imperial college well-test data information deconvolved response gringarten gas condensate field Introduction...

... spe 107310 petroleum engineer reservoir property application transmissibility reservoir simulation Introduction The definition of the development project of an oil field is generally made with basis on insufficient information and under conditions of a great uncertainty as to the geologic...

... Upstream Oil & Gas correlation reservoir property petrophysical parameter society of petroleum engineers permeability Introduction: seismic attribute definitions and discussions The use of seismic attribute data for prediction of detailed reservoir properties began more than 30 years ago...

... The small dimension of recently discovered reservoirs and the increasing cost of production has been demanding improvements in reservoir characterization. Porosity, permeability, fluid and gas saturation, as well as other reservoir properties are measured in well. But well data cover only...

... environment maps to shape the gross sand distribution maps. The gross sand maps and depositional environment maps were used in deterministic modeling software to guide the mapping of some reservoir properties. After reservoir petrophysical properties were calculated in the 71 wells, it was found that net...

... verify P* and permeability from the final buildup and we can calculat skin because we have production in the second flow (swabbing); in this way, we have a good radius of investigation to obtain a more real skin. drillstem/well testing reservoir property upstream oil & gas surge period...