....), the flocculation point (F.P.), and the % flocculation are determined. The first corresponds to the vial in which a continuous decay of the absorbance is detected, in the second parameter the presence of a precipitate is detected visually, and the third corresponds to the percentage change between the average...

... the flow zones, behavior patterns were settled between production (PLT’s), noise and cementation logs with the second derivative of temperature. For an equilibrium system (non-flow zones) the second derivative values correspond to zero ( d 2 T d D 2 = 0 ) , whilst for a dynamic...

... on resource exploitation allowing the acquisition of the corresponding architectural parameters. Due to the lack of well data at the selected locations, geological models and reservoir properties were defined based on published data from studies on analogue situations including data from the first production...

... structural geology correspond attitude centenario fm Rayoso Formation Argentina intrusive body province log analysis sill Introduction The Neuquén Basin is part of an extensive oil region that comprises most of the entire province of Neuquén, the western area of the provinces of Río Negro...

... Field studies and seismostratigraphic analysis show that fault reactivation events were common during the quasistatic event on the western margin of Gondwana during Middle to Late Triassic ( Barredo 2012 ). These recurrent extensional pulses were named Rift I, II and III and their corresponding...

... sandstones with mud drapes and organic matter, and marine glauconitic sandstones with/without calcareous cement. Integrated sedimentological and petrophysical analysis defined five rock types (RT1-RT5). RT1 and RT2 correspond to tidal quarztarenites and fluvial sandstones with few discontinuous clay laminae...

... correspond average reservoir pressure dew point pressure single-phase pseudopressure gas permeability reservoir condensate banking Introduction Retrograde condensation occurs when the reservoir pressure drops below the dew point pressure. This condition results in the formation of condensate...

... correspond production rate geocellular model permeability pvt measurement reservoir simulation estimates of resource in place drillstem testing rock type phyllosilicate flow in porous media resource in place estimate sedimentary geology sedimentary rock geologist drillstem/well testing log...

... to 2010 and its corresponding analysis considering the sustainability of the model's application in time, the benefits in terms of time, costs and characterization that determines the FEL index measurement. Because of the confidentiality of information, for purposes of this article the names of projects...

... development an empirical set of equations, through the use of a system of multiple regression statistical analysis. This is job was based on Pittman equations. Pittman calculated the pore thorat radii that correspond to the 35 th percentile, which was extended to a spread of mercury saturations percentiles...

... fluid sample drillstem testing complex reservoir information representativeness liquid loading problem reservoir fluid condensate reservoir modeling & simulation saturation compositional change correspond society of petroleum engineers upstream oil & gas reservoir pressure...

..., continuity and its associated petrophysical properties. structural geology information geologic modeling facies Upstream Oil & Gas Colorado Formation petrophysical property correspond geostatistical modeling geological modeling Thickness electric log spe 122234 Lisama field Reservoir...

... design fluid loss control drilling fluid selection and formulation well logging petroleum engineer trajectory drilling fluid formulation drilling fluids and materials log analysis oriente basin petrel correspond drilling operation drilling fluid property pa-14 drilling fluid chemistry...

.... waterflooding flow in porous media injectivity decline transition time variation deep bed filtration prediction mobility upstream oil & gas pressure drop impedance fluid dynamics history critical porosity fraction cake formation formation damage coefficient correspond spe 93885 formula...

... interpretation tools can be combined with experimental design methodology to perform advanced risk analysis for reservoir management. analysis case rsm model production parameter machine learning artificial intelligence reservoir simulation objective production forecast correspond injrate...

... wellbore integrity petroleum engineer table 2 evaluation bower trajectory drilling well stage correspond sedimentary basin prediction Introduction The prospect generation and production maintenance plans of Cantarell, the largest offshore production field in the world located in the south...

... structural model using the GeoSurf application. The structural model defined here is composed of patches. Limits of these patches correspond to any of the main faults (with a throw above 80 feet) or to borders (limit of the study area). Faults selection has a great influence on the geometry of the future...

... gas lift liquid production closing pressure artificial lift system drillstem/well testing gas injection method correspond scenario pwf correlation enhanced recovery procedure petroleum engineer injection pressure society application pvc pvo valve 2 drillstem testing deviation port...

... Plots of scanning rel. perms. for oil are given in Fig. 3 . The upper solid curve corresponds to drainage, for which the oil saturation changes from zero (no oil yet in the carrier bed) to 1-s wi (overall bed cross section if filled by oil in the presence of connate water). The lower solid curve...

... original space operational condition operator algorithm multidimensional projection technique multivariable process trajectory sapiem spe 69523 operational region representation petroleum engineer correspond operation society identifying operational condition hypothesis upstream oil...