..., differential pressure ratios, flowrates, pressures, temperatures, etc. The required specification for either discharge or reinjection is a key factor in determining the necessary process equipment and chemicals that are needed for the separation process. For injection, the water quality needed to be achieved...

... Additionally the produced oil has high viscosity (μ> 150 cp) which is not facilitating the testing operation in terms of separation of oil and gas in the separator. The flow time through the separator may not be enough for a complete separation. In summary, The well test methodology should...

... (ESP) is one of the most commonly used artificial lift systems in oil and water wells. The ESP is a multistage centrifugal pump placed down in the wellbore, capable of delivering high pressure increments for large oil rates. Reservoir oil is always saturated with natural gas, which will be separated...

... Abstract The natural depletion of reservoirs with increased water-cut and aging facilities has forced the oil and gas industry to improve methods and technologies for the ultimate hydrocarbon recovery. A compact patented in-line cyclonic separator, called the Wx, has been developed...

... artificial lift system booster pump SJP system back pressure motive flow hydraulic jet pump liquid phase flow rate Oil Well society of petroleum engineers Upstream Oil & Gas revival Surface Jet Pump application LP gas multiphase pump compact separator initial revival...

... and desalting systems using electrostatic fields, chemicals, temperature and the g-force for separation of oil and water. These systems have their limitations when it comes to lower API grades and higher viscosities in capacity and quality. A reliable alternative to the traditional desalting process...

... of the produced water in the upstream oil and gas industry and demonstrate variances between possible solutions. This increment in the produced effluent water shall develop a huge challenges in achieving the required oil targets due to the limitation in capacities of the separation equipment's at the existing...