... injection pressure skin factor Upstream Oil & Gas injection pressure simulator artificial lift system well performance PVT measurement gas lift consolidated sandstone flow rate production rate OPR flow assurance water cut natural flow sandstone flow simulator production flow rate...

... water cut in the UG-MO reservoir is posing a major challenge in maintaining the oil production rate as the higher mobility of water compared to the oil will lead to a decline in the oil production rate and prevent oil producing zones from contributing effectively. The increase in water cut is attributed...

... the water coning potential recovery dynamics prior to and after water breakthrough, and water cut control with production rate in the field assessing and well productivity investigates dynamics of productivity loss in the presence of uncertainty of real field geological properties by optimizing new wells...

... swellable packers. Management of production from these long horizontal sections through these complex completions is highly cost-sensitive and maintaining an optimum production rate is key to the economic success of these type of wells, especially in the current low oil price environment. In this case...

... fail. artificial lift system Upstream Oil & Gas rotor progressive cavity pump beam pumping sucker rod Kuwait insert pump anchor sucker rod pump production rate well behavior requirement intervention PCP pump Optimization System workover rig installation recover production...

... million drillstem/well testing significant reduction Upstream Oil & Gas header pressure GC test facility Kuwait reduction DCS portable test water cut reservoir presentation test result dcs facility test facility Drillstem Testing accuracy Wellhead production rate society...

... Abstract Unconventional reservoirs have characteristics that differ from traditional conventional reservoirs. The productivity profile of an unconventional well can be significantly different from a conventional well, in that the production rate declines faster in an unconventional well...

... case water production society of petroleum engineers production rate water cut base case downhole water sink technology unwanted water production dw completion cumulative oil production application WOR Downhole Water Sink wojtanowicz excessive water production water problem...

... Abstract Producing heavy oil from shallow wells using rod pump applications requires careful design considerations especially for down hole components to achieve maximum production rate and maximize the run life. This paper highlights a successful case study of one such heavy oil sucker rod...

... initial production rates, it was decided to develop the stranded reserves by drilling a horizontal well to replace three vertical wells and test the feasibility of applying horizontal wells with multi-stage fracturing in such tight reservoir. A horizontal well with 7 fracturing stages was completed...

..., is still relatively under exploited presently with only 13 active wells with very low total production rate compared to other reservoirs. High reservoir heterogeneity, tightness and poor fluid properties necessitate the application of new stimulation technology targeting good frac conductivity and deep...

... test Kuwait North Kuwait society of petroleum engineers proppant pack fracturing fluid production rate stimulation reservoir kuwait accelerate development fracture upper burgan reservoir fracturing materials Upstream Oil & Gas perforation scheme application production enhancement...

... & Gas completion shroud lift method unlimited access completion interval ESP operation North Kuwait society of petroleum engineers intervention diameter series motor Well Intervention workover production rate bypass velocity Background The North Kuwait (NK) Asset is located...

... and to have positive production impact on nearby well RA-000B. Before application of this new technology, three intervals were perforated with last production rate @ 196 bopd with 90% water cut and closed for pressure. PNC log (sigma log)was recorded which shows that out of three perforated interval...

... Abstract Cyclic Steam Injection (CSS) has been used in the industry to increase the recovery factor and production rate from heavy oil reservoirs. CSS is multi-cycled steam recovery process with three stages and five operational parameters (injection rate and its duration, soak time, production...

... of productivity problems at field level, and additional fast screening was done at well level to identify candidates for production enhancement. Representative Wells were selected for detailed diagnostics based on the relevance and size of productivity impact and, the potential of its production rate or well...

... Abstract To maximize the production rate and develop marginal/unconventional fields, all kinds of intelligent wells have been proposed and practiced in field, including multi-stage fractured horizontal well, multi-lateral or fishbone completions. Undulating horizontal well, also called snaky...