The reliability of the estimated parameters in well test analysis depends on the accuracy of measured data. Early time data are usually controlled by the wellbore storage effect. However, this effect may last for the pseudo-radial flow or the boundary dominated flow. Eliminating this effect is an option for restoring the real data. Using the data with this effect is another option that can be used successfully for reservoir characterization.

This paper introduces a new technique for interpreting the pressure behavior of horizontal wells and fractured formations with wellbore storage. A new analytical model describes the early time data has been derived for both horizontal wells and horizontal wells intersecting multiple hydraulic fractures. Several models for the relationships of the peak points with the pressure, pressure derivative and time have been proposed in this study for different wellbore storage coefficients. A complete set of type curves has been included for different wellbore lengths, skin factors and wellbore storage coefficients. The study has shown that early radial flow for short to moderate horizontal wells is the most affected flow regime by the wellbore storage. For long horizontal wells, the early linear flow is the most affected flow regime by the wellbore storage effect.

The most important finding in this study is the ability to run a short test and use the early time data only for characterizing the formation. This means there is no need to run a long time test to reach the pseudo-steady state. Therefore, from the wellbore storage dominated flow, the early radial and pseudo-radial flow can be established for horizontal wells and hydraulic fractured formations. A step-by-step procedure for analyzing pressure tests using the analytical models (TDS) and the type curves is also included in this paper for several numerical examples.

You can access this article if you purchase or spend a download.