1-15 of 15
Keywords: sand control
Close
Sort by
Proceedings Papers

Paper presented at the International Thermal Operations and Heavy Oil Symposium, October 20–23, 2008
Paper Number: SPE-117486-MS
... to insert the disc securely such that it has adequate retention strength and prevents bypass of fluid around the disc. Abstract Steam assisted gravity drainage (SAGD) wells typically require the deployment of an open hole completion combining sand control with adequate mechanical strength to withstand...
Proceedings Papers

Paper presented at the International Thermal Operations and Heavy Oil Symposium, October 20–23, 2008
Paper Number: SPE-117615-MS
..., time-saving solution for SAGD installations when floating sand control screens in the hole is required. This solution provides a unique alternative to the methods currently being used to install sand screens with SAGD technology in the rapidly growing Canadian market for bitumen recovery. sand...
Proceedings Papers

Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium, November 1–3, 2005
Paper Number: SPE-97336-MS
... are proven or suggested in this paper. Horizontal or deviated wells are considered the base case. Heavy oil reservoirs often suffer from: Unconsolidation and sand production due to immature rock emulsions and annular solids transport causing plugging of screens and sand control failures serious...
Proceedings Papers

Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium, November 1–3, 2005
Paper Number: SPE-97771-MS
... sand control formation damage enhanced recovery furmel 301 thermoset resin schlumberger dowell slurry drilling fluid management &amp; disposal fracture INTRODUCTION<sup>[<xref ref-type="bibr" rid="R1">1</xref>] [<xref ref-type="bibr" rid="R3">3</xref>] [<xref ref-type="bibr" rid="R4">4...
Proceedings Papers

Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium, November 1–3, 2005
Paper Number: SPE-97885-MS
... can be improved by non-thermal massive sand production and foamy oil behavior, referred to CHOPS. Integrated well completion strategies with CHOPS were used to increase heavy oil production. Limited sand influx provides a means for effective sand control while eliminating the need for conventional...
Proceedings Papers

Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium, November 1–3, 2005
Paper Number: SPE-97912-MS
... and pack downhole sensor frac and pack injector sand control breakthrough Introduction The steam flood field is a multi-billion-barrel, heavy-oil-producing field that lies on the central Sumatra basin, Indonesia ( Fig. 1 ). The field consists of approximately 4,114 producers, 1,610 steam...
Proceedings Papers

Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium, November 1–3, 2005
Paper Number: SPE-97898-MS
... with modern logging and analysis methods and recommendations for data gathering campaigns in these environments are provided. The technological challenges of an offshore heavy oil development can be met with advances in sand control, ESP technology and EOR techniques. Combined together these solutions provide...
Proceedings Papers

Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium and International Horizontal Well Technology Conference, November 4–7, 2002
Paper Number: SPE-79025-MS
... sand thin section slot size husky sand flow assurance cross section size distribution microphotograph completion installation and operations enhanced recovery bitumen production monitoring sand pack thin section reservoir surveillance oil sand sil-1 sand complex reservoir sand control...
Proceedings Papers

Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium and International Horizontal Well Technology Conference, November 4–7, 2002
Paper Number: SPE-79026-MS
... the pressure loss in horizontal wellbore and can cause an unreasonable well design. This paper developed a model to optimize the horizontal well performance by integrating the fluid flow in reservoir, the flow in sand control zone near wellbore, the flow in horizontal wellbore and tubing into an integral...
Proceedings Papers

Paper presented at the SPE International Thermal Operations and Heavy Oil Symposium, March 12–14, 2001
Paper Number: SPE-69714-MS
... sand production influx porosity mechanism reservoir characterization cold heavy oil production sand control reservoir bitumen oil sand complex reservoir integrated reservoir model wormhole propagation flow in porous media gradient calgary Introduction Enhanced heavy oil...
Proceedings Papers

Paper presented at the International Thermal Operations/Heavy Oil Symposium, March 17–19, 1999
Paper Number: SPE-54101-MS
... effective sand control for thermal recovery in horizontal wells. Both laboratory tests and field experiment showed that the metal-fiber screen has high permeability, high production rates and perfect sand control effect. The metal-fiber screen can completely meet for sand control requirements in short...
Proceedings Papers

Paper presented at the International Thermal Operations and Heavy Oil Symposium, February 10–12, 1997
Paper Number: SPE-37533-MS
... bypassing of near-welIbore damage and elimination of the gravel pack completion. A secondary benefit of the high conductivity fracture, using CRC sand, is that it performs as a sand control technique. Rindu Completion Strategy The primary goal of the Rindu TSO Pilot was to demonstrate productivity...
Proceedings Papers

Paper presented at the International Thermal Operations and Heavy Oil Symposium, February 10–12, 1997
Paper Number: SPE-37553-MS
... is that, in addition to estimating sand production onset, we also hope to be able to calculate the accumulated sand production. P. 367^ sand control foamy oil flow Reservoir Characterization Upstream Oil &amp; Gas heavy-oil reservoir flow assurance Fluid Dynamics enhanced recovery sand production...

Product(s) added to cart

Close Modal