1-10 of 10
Keywords: producer well
Close
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Proceedings Papers

Paper presented at the SPE Improved Oil Recovery Conference, April 14–18, 2018
Paper Number: SPE-190312-MS
... producer well processing rate injection reservoir simulation Oil Recovery reduction injectivity Introduction CO 2 enhanced oil recovery (CO 2 EOR) has been commercially implemented in the United States since the early 1970s with about 114 active CO 2 floods in the US contributing...
Proceedings Papers

Paper presented at the SPE Improved Oil Recovery Conference, April 14–18, 2018
Paper Number: SPE-190314-MS
... is 506,000BWPD, water injected is 618,000 BWIPD and the average oil production rate of a producer well is 30BOPD with an average water cut of 90%. Injector wells have an average injection rate of 1,500BWIPD. The field is subdivided in six operational areas: Cira North, Cira East, Cira South, Infantas North...
Proceedings Papers

Paper presented at the SPE Improved Oil Recovery Conference, April 14–18, 2018
Paper Number: SPE-190315-MS
... and siltstones with an average thickness of 600 ft and a permeability range from 80 mD to 2 Darcy. The field has been under secondary recovery since the 1960's and in 2005 a redevelopment of the water flooding process began. The field has approximately 400 patterns and 1,000 active producer wells, 95% of which...
Proceedings Papers

Paper presented at the SPE Improved Oil Recovery Conference, April 14–18, 2018
Paper Number: SPE-190156-MS
... Abstract Injection of blocking gels in the near wellbore of producer wells is a technique employed for water production control. A proven and effective alternative to control this water excess is the application of crosslinked gels. Water shut-off (WSO) treatments efficiency depends on several...
Proceedings Papers

Paper presented at the SPE Improved Oil Recovery Conference, April 14–18, 2018
Paper Number: SPE-190190-MS
... History-matching the primary production behavior was crucial to represent the pressure field at the beginning of nitrogen injection. Figures 5 to 7 illustrate the bottom-hole pressure match obtained for each of the first-line producer wells. NCT Design The in situ combustion pilot test...
Proceedings Papers

Paper presented at the SPE/DOE Symposium on Improved Oil Recovery, April 17–21, 2004
Paper Number: SPE-89398-MS
... the reservoir response under different gel treatment scenarios as: treatment in injector well, treatment in the producer well, and simultaneous treatment in both injector and producer wells. Idealized and field type simulation results showed a water cut reduction from 90 to 30%, matching the trends observed...
Proceedings Papers

Paper presented at the SPE/DOE Improved Oil Recovery Symposium, April 13–17, 2002
Paper Number: SPE-75259-MS
... perfluorocarbon tracer result breakthrough production rate water injection wag pilot chemical tracer gas tracer spe 75259 producer well vle field injection wag test water tracer tracer wag process tracer test analysis compound upstream oil & gas enhanced recovery maracaibo lake...
Proceedings Papers

Paper presented at the SPE/DOE Improved Oil Recovery Symposium, April 3–5, 2000
Paper Number: SPE-59306-MS
..., (2) does not interfere with normal waterflooding activities, (3) is environmentally friendly, and (4) is the least expensive of all EOR processes in terms of cost per barrel of incremental oil recovered. microorganism nitrate ion oil production upstream oil & gas compound producer well...
Proceedings Papers

Paper presented at the SPE/DOE Improved Oil Recovery Symposium, April 3–5, 2000
Paper Number: SPE-59334-MS
..., is manifested primarily in its gravity-assist mechanism, which allows a stable steam chamber to grow. The oil which is mobilised at the steam-oil interface drains down towards the horizontal producer well. In THAI, a similar gravity-assist mechanism exists by virtue of a ‘narrow mobile zone’ that develops...
Proceedings Papers

Paper presented at the SPE/DOE Improved Oil Recovery Symposium, April 19–22, 1998
Paper Number: SPE-39649-MS
... between the injector and its associated producer wells. Prior to implementing the main treatment, a program of injector well tests is used to evaluate the flow characteristics of the thief zone(s), and the optimum foam injection strategy. The delayed gelation kinetics of the system are designed...

Product(s) added to cart

Close Modal