Performance of current synthetic EOR polymers is primarily constrained by salinity, temperature and shear which restrict their application to low to moderate salinity, low to moderate temperature and relatively high permeability reservoirs. The primary goal of the current work is to qualify recently developed associative polymers (AP) for EOR applications as well as to study their behavior in porous media. We also compare their performance with conventional non-associative polymers. In this work, we present the evaluation of several associative polymers. Two broad types of associative polymers were tested, one with a partially hydrolyzed poly acrylamide (HPAM) backbone and the other with a sulfonated HPAM backbone. The concentrations of the tested polymer vary between 75 ppm and 1000 ppm. We demonstrate the applicability of these innovative AP's through the carefully controlled lab experiments: (1) Corefloods in sandpacks to compare the sweep behaviors with conventional HPAM's. (2) Single phase flooding experiments are carried out in consolidated outcrop rocks to identify optimal polymer concentrations to achieve the desired in-situ resistance. (3) One dimensional displacement experiments with 8 cP and 90 cP oil are carried out in both unconsolidated and consolidated rocks at different temperatures to validate improved oil recovery. Results generally indicate that associative polymers require lower polymer concentration to generate high resistance factors in porous media and have stable long term injectivity behavior in high permeability rocks (>1D). Associative polymers with HPAM backbone have better filterability and injectivity in comparison to those with HPAM sulfonated backbone in low permeability(<300mD) rocks. Improved oil recovery in high permeability rocks compare well with conventional HPAM and sulfonated HPAM polymers. Based on the laboratory results, we are able to establish the selection baseline for associative polymers in different permeability rocks, salinities and temperatures. Such information can be used to select and screen the appropriate associative polymers, resulting in extending their applicability envelope in EOR.

You can access this article if you purchase or spend a download.