... CRI operation tank waste management platform classification shaker slurry Upstream Oil & Gas re-injection package operation integration transportation Introduction The three main drivers for the selection of a cuttings collection and transport system and re-injection package...

... to a remote location, completing a basic SIPS. The separated gas is conveyed from the SIPS to the required end user. platform flow rate sip application reduction Upstream Oil & Gas subsurface production platform production system separation and treating separator spe 102462 requirement...

... Christmas tree on the offshore platform, as can be seen on Figure 5 . Abstract This paper shows the results of conceptual studies for the design of thermally bundled wells to optimize the heavy oil production of the offshore fields in the Gulf of Mexico. During the last recent years, PEMEX has found...

... permeability, and ratio of vertical to horizontal permeability, had the most impact on the estimated oil recoveries. Upstream Oil & Gas Modeling & Simulation flow in porous media Reservoir Characterization Fluid Dynamics porosity facies platform simulation run random uncertainty...

... in the field including wells, platforms, separation facilities, gas pipes, and delivery points. This is based on more than 20,000 samples of gas chromatography from gas being produced. The samples are recovered in strategic points by a team work in sampling, chromatography, and data analysis. Sampling...

...-Exploration & Production (PEP). It is proposed to perform processing the produced hydrocarbons mixture on an offshore platform to obtain transportable oil and gas streams, which are injected into separate pipelines. The processing scheme developed includes multistage separation and gas compression...

... or two flowlines while the third is for service. When active heating is applied, hot oil will be injected into one of the flowlines at the platform. The heating oil will be circulated through the flowline and the service line, and the third line will be for produced fluid. The pigging loop will be used...

... Abstract The Chuc-A production platform produced an average of 59,200 BPD until October 24 th 1997, in this date a fire happened when installing a separator. This oil volume corresponds to the 43% of the field total production. Once the fire was controlled, the personnel of the Drilling...

... salgado castro ek-balam field operation power fluid upstream oil & gas separator production monitoring platform spe 59021 hydraulic jet pump multiphase pump centrifugal pump production control mexico government application north america government society reservoir petroleum engineer...

... for convection for matching the past history of the Akal field, part of the Cantarell complex. enhanced recovery gas cap exploitation gas effluent reservoir pressure fracture gor convection phenomenon fraction reservoir simulation pvt measurement molar fraction platform upstream oil & gas...

...SPE 39864 Society of Petroleum Engineers Design and Application of Passive Fire Protection for the Decks of Deepwater Tension Leg Platforms R. J. Hunt, Shell Deepwater Development Inc. Copyright 1998, Society of Petroleum Engineers, Inc. This paper was prepared for presentation at the 1998 SPE...

... Abstract This paper summarizes the application of the PEP/IMP Transitory Criteria for the assessment of fixed offshore platforms located in the Bay of Campeche, Mexico. Comparisons of the Transitory Criteria with the Section 17 of API-RP2A, 20th edition are made, utilizing two sets of metocean...

... Abstract Po1-A compression platform belongs to a petroleum platform complex located in the Pemex Exploracion y Produccion's marine zone in the Gulf of Mexico. It receives the natural gas, that is first separated from oil in the production platforms, via two pipelines called high pressure...

... Abstract A new type of jacket design was developed for a Gulf of Mexico platform in 630 feet of water. The jacket was designed for installation in two sections that were joined underwater with a grouted connection. Both jacket sections were lifted from transport barges and installed...

... Abstract This paper presents structural concepts utilized and proposed for deep water applications (400 ft. to 1000 ft.) in the Northern Gulf of Mexico. Concepts presented include tripods, lifted and launched jackets and main and skirt piled platforms. General analysis procedures...

... included the drilling and cuttings injection on the first 7 wells over a subsea template. A platform was installed in the last quarter of 1994 and the second drilling phase of this project began in March of 1995. Ten (10) wells have been drilled to date and the cuttings have been disposed of in four (4...

... upstream oil & gas platform tension leg platform manifold subsea system maintenance drilling rig completion main characteristic production rate fpso development option floating production system deepwater field development option production platform arrangement water depth...

... 50 m to 3,400 meters water depth (fig. 1). The first production system installed in this basin began its production in 1977. Today, eighteen years later, the overall production system comprising 15 fixed platforms and 13 floating systems distributed among 33 oil fields which account...

... A generic characteristic of the Tension Leg Platform (TLP) concept is the interdependencies between the elements of its design, Ref. 1 . For example, a change in deck layout and/or weight can affect the center of gravity, which affects platform dynamics, tether tensions, and so on. An important attribute...

... ABSTRACT This paper will describe a production system and associated operating scenarios which allow more cost effective methods of accessing and depleting deep water reservoirs in the Gulf of Mexico. The system is named the "Micro TLP" (Tension Leg Platform) and it has been developed...