Skip Nav Destination
1-5 of 5
Keywords: solid concentrationClose
Paper presented at the SPE International Conference and Exhibition on Formation Damage Control, February 7–9, 2018
Paper Number: SPE-189515-MS
... formation sand in brine. This slurry is then injected into the brine flow-stream to accomplish the desired solids concentration for the test (typically 0.5-1.0%). The method allows for flexibility both in the brine flow-rate used and in the solids concentration tested. The slurry injection is accomplished...
Paper presented at the SPE International Symposium and Exhibition on Formation Damage Control, February 18–20, 2004
Paper Number: SPE-86528-MS
... medium. This paper describes a simplified approach to account for the effects of pressure and temperature changes on solubility calculations as well as the change in the injected fluid composition during injection-production cycles. solubility product solid concentration approximation reaction...
Paper presented at the SPE Formation Damage Control Symposium, February 26–27, 1992
Paper Number: SPE-23824-MS
... concentration coefficient equation drilling fluid property filtration equation solid concentration filtration prediction dynamic filtration drilling fluid chemistry drilling fluids and materials upstream oil & gas spe 23824 shear rate drilling fluid formulation specific cake...
Paper presented at the SPE Formation Damage Control Symposium, March 24–25, 1982
Paper Number: SPE-10648-MS
... designed, tested, and is successfully being used in Gulf Coast operation.* The system consistently shows a one-pass solid efficiency of greater than 98%, at varying flow rates. Resulting solid concentrations average 74 parts per million (ppm, 0.007% by volume) and have been recorded as low as 10 pgm. This...
Paper presented at the SPE Symposium on Formation Damage Control, February 15–16, 1978
Paper Number: SPE-7011-MS
... shakers, desilters, mud cleaners, and centrifuges, solids concentrations can be effectively controlled. This discussion will not include the detrimental effect of drill solids on the formation itself, but will cover the "whys" and "hows" of controlling drill solids using this equipment. WHAT IS THE...
Product(s) added to cartClose Modal