... upstream oil & gas swab response ecd drilling fluid formulation simulation control axial velocity optimise tripping pulling cased hole instrumentation drilling conference pooh exhibition pipe spe iadc drilling conference Background and objective. The current practice...

... solutions. production monitoring topside instrumentation downhole flowmeter flow metering flow rate reservoir surveillance two-phase flowmeter icv application flow measurement technology flow velocity flowmeter flow measurement sensor operator production control upstream oil & gas...

... and the addition of new sensor types as these become available – without interruption of normal production and at minimal incremental cost. We report on a system that can address EOR applications, intelligent well monitoring and that we believe offers a basis for instrumenting deep and hot sub-sea reservoirs...

... transfer metering system an outstanding duty. Improvement of instrumentation, equipment and installation of methods of calibration and operation is a constant care for the Operator, who also prepares the future. Differential pressure cells were replaced, insertion type of density cells were replaced...

... behaviour of the platforms. First, a short description of the E-and P-data programme is given followed by some more detailed information on the particular instrumentation installed on typical platforms. Thereafter, the methods of analysis are described and, finally, samples of some of the results...

... behaviours of this type of gravity platform and a conventional steel jacket. frequency coherence pore pressure offshore concrete platform platform base level Upstream Oil & Gas variation upper layer pore pressure dynamic behaviour wave direction base acceleration instrumentation...

... for the installation phase instrumentation. The Central Institute for Industrial Research was consultant for the data acquisition system. The River and Harbour Laboratory at the Technical University of Norway determined the environmental loading data. Det norske Veritas certified the platform on behalf...

... by divers. There are three main causes of failure, corrosion, fatigue and accidents, and it is very difficult to select areas that are most likely to have suffered. Finding that 10% of the structural members are in good condition is only superficially reassuring. The real point is to see if instrumentation...