1-13 of 13
Keywords: sand production
Close
Sort by
Proceedings Papers

Paper presented at the SPE/ISRM Rock Mechanics in Petroleum Engineering, July 8–10, 1998
Paper Number: SPE-47381-MS
.... The perforation balance policy will be discussed in the light of the results presented above. This paper was prepared for presentation at the SPE/ISRM Eurock 98 held in Trondheim, Norway, 8 10 July 1998. 2. The use of well test as a systematic mean to predict sand production will be outlined. This paper...
Proceedings Papers

Paper presented at the SPE/ISRM Rock Mechanics in Petroleum Engineering, July 8–10, 1998
Paper Number: SPE-50559-MS
... basis. And it was expensive. There was also in some companies a business pull to develop sand prediction techniques, since they saw that unwanted sand production could jeopardize many of the big developments taking place. In contrast, borehole stability and drilling problems were considered "manageable...
Proceedings Papers

Paper presented at the SPE/ISRM Rock Mechanics in Petroleum Engineering, July 8–10, 1998
Paper Number: SPE-47361-MS
... are presented in a standard and consistent way, which ensures good quality control in the interpretation of the results. By using this sand prediction simulator, complex modeling of the sand production potential is now available for all production engineers involved in well completion design in Statoil. P. 271...
Proceedings Papers

Paper presented at the SPE/ISRM Rock Mechanics in Petroleum Engineering, July 8–10, 1998
Paper Number: SPE-47378-MS
... fracture initiation, Introduction Stress analysis of a wellborw with perforations is important in several aspects of well completion; for example, failure of perforations leading to sand production; fracture initiation; and reduction of sanding risk through oriented perforations. In pre-existing perforated...
Proceedings Papers

Paper presented at the SPE/ISRM Rock Mechanics in Petroleum Engineering, July 8–10, 1998
Paper Number: SPE-47333-MS
... of the system make it a powerful tool in optimizing completion design. P. 133 vertical stress sand control prediction upstream oil & gas principal stress simulation sand prediction criterion sand production failure criterion pressure depletion material model simulator reservoir...
Proceedings Papers

Paper presented at the SPE/ISRM Rock Mechanics in Petroleum Engineering, July 8–10, 1998
Paper Number: SPE-47334-MS
... Abstract The mechanical stability of a borehole or perforation tunnels can have a critical influence on petroleum drilling and recovery processes. For instance, extensive failure of rock surrounding an open-hole completion may result in massive sand production. Furthermore, it is often...
Proceedings Papers

Paper presented at the SPE/ISRM Rock Mechanics in Petroleum Engineering, July 8–10, 1998
Paper Number: SPE-47329-MS
...SPE/ISRM 47329 Sand Production on Water Injectors: Just How Bad Can It Get? F.J. Santarelli, SPE, ORMIS, Stavanger, Norway, and E. Skomedal, P. Markestad, SPE, H.I. Berge, SPE, and H. Nasvig, Statoil, Stavanger, Norway Copyright 1998, Society of Petroleum Engineers, Inc. production undergoes...
Proceedings Papers

Paper presented at the SPE/ISRM Rock Mechanics in Petroleum Engineering, July 8–10, 1998
Paper Number: SPE-47331-MS
... also crush the sand grain and damage the formation, rupture the casing, and eventually destroyed the well. Sand production and wellbore stability of the heated horizontal well are of great concern in well completion and perforation design. Formation damage due to stress concentrations induced...
Proceedings Papers

Paper presented at the Rock Mechanics in Petroleum Engineering, August 29–31, 1994
Paper Number: SPE-28065-MS
... ABSTRACT Sand production is detrimental in oil and gas production. Sand-control measures include gravel-packing, drawdown control, sand consolidation, slotted liners, pre-packed screens, and frac-and-pack. Vertical wells can use any of these methods. Extended-reach, highly inclined wells...
Proceedings Papers

Paper presented at the Rock Mechanics in Petroleum Engineering, August 29–31, 1994
Paper Number: SPE-28067-MS
... (>80%) of heavy oil well production histories in Alberta and Saskatchewan ( C-FER Report, 1992 ). Wells which do not display this almost always have production histories that are anomalous, such as a sudden water-oil ratio change, a sudden spike of sand production, and so on. The sand production...
Proceedings Papers

Paper presented at the Rock Mechanics in Petroleum Engineering, August 29–31, 1994
Paper Number: SPE-28071-MS
... ABSTRACT Model experiments of sand production in a perforated sample of a weak outcrop sandstone are compared to tests on drilled cavities in the same rock. The perforation tunnel was filled with rock debris and a damaged zone occurred around it. Limited sand production resulted due to erosion...
Proceedings Papers

Paper presented at the Rock Mechanics in Petroleum Engineering, August 29–31, 1994
Paper Number: SPE-28066-MS
... ABSTRACT Sand production is very common in the gas wells of the Adriatic Sea. Accurate field surveys have been conducted before and after sand production has occurred in wells where no sand control methods had been initially introduced. Unlike the numerous other papers dealing with sand...

Product(s) added to cart

Close Modal