Abstract
Due to usual higher oil and gas production, high permeable reservoirs are considered to be forgiving and to be able to hold up very well against formation damage induced by any solids and liquids, so these reservoirs have not deserved a fair share of that attention. In fact, any formation damage can inevitably alter the permeability of the porous media and adversely affect oil recovery to different degrees, and the damage is more deadly to horizontal well. Triassic reservoir with the maximum permeability of more than 2 Darcy and the maximum throat sizes of more than 100 μm in the Tarim Basin provides us with a perfect example. Horizontal well is the key technique to increase oil production in this reservoir. However, after completion, horizontal wells can not produce through natural power or gas-lift, and did not present the advantages of increasing production compared with vertical wells. The results of granularity analysis and dynamic damage evaluation experiments present that the original drill-in fluids can not protect the reservoir with permeability of more than 100 mD, while the percentage of regain permeability is less than 50%. The drilling fluids were modified by adding fibrous bridging agents instead of common spherical bridging agents to rapidly form a tight plugging zone near the wellbore that efficiently seals the large pore throats. The dynamic filtration test and the analysis of mudcake through the FEI Quanta 450 environment scanning electron microscope (ESEM) showed that the optimized drill-in fluids can form tight filter cakes, plug the pore of reservoir effectively, and enhance the percentage of regain permeability of core samples up to 90%. After the application of the new drill-in fluids, horizontal wells are in high flowing production after completion, and the wellbore quality are also improved.
