1-13 of 13
Keywords: Completion Fluid
Close
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Proceedings Papers

Paper presented at the SPE/IADC International Drilling Conference and Exhibition, March 8–12, 2021
Paper Number: SPE-204091-MS
... the lower completion. In the case of wellbores completed with stand-alone sand screens, the screen running fluid may require to be stationary in the wellbore for some time and under these conditions it is important that the fluids remain mobile to enable the residual Drill-In / Completion fluid to be...
Proceedings Papers

Paper presented at the SPE/IADC International Drilling Conference and Exhibition, March 8–12, 2021
Paper Number: SPE-204095-MS
... required a priority-pollutant-free completion fluid for a subsea development,whose produced fluids (oil and water) are combined and processed with that from several other fields at a shared production facility. Associated produced water separated from the crude is dischargedoverboard and must be free of...
Proceedings Papers

Paper presented at the SPE/IADC International Drilling Conference and Exhibition, March 5–7, 2019
Paper Number: SPE-194177-MS
... the completion fluid reaches the narrow annuli and displays sudden increase in frictional loss value due to the hydraulic model limitations. This paper focuses on the limitations of estimating the frictional loss in narrow annulus created by the Gravel Pack Packers,when predicted using the...
Proceedings Papers

Paper presented at the IADC/SPE Drilling Conference and Exhibition, March 6–8, 2018
Paper Number: SPE-189623-MS
... of the completion fluids, topside valves upstream of the test separator were continuously blocked by completion fluid and resolving this issue slowed the bean-up rate during the clean-up period. Also, the drawdowns experienced during the clean-up periods were not in line with expectations based on...
Proceedings Papers

Paper presented at the SPE/IADC Drilling Conference and Exhibition, March 17–19, 2015
Paper Number: SPE-173060-MS
...-high rate gas wells was made to select and finalize the design concept after which the commensurate engineering rigor was applied. This paper will highlight the design, qualification, Quality Assurance / Quality Control (QA/QC) and operational performance of the completion fluids inclusive of the...
Proceedings Papers

Paper presented at the SPE/IADC Drilling Conference and Exhibition, March 17–19, 2009
Paper Number: SPE-119445-MS
... Completion Fluid return permeability SPE/IADC 119445 Formation Damage Induced by Formate Drilling Fluids in Gas Bearing Reservoirs: Lab and Field Studies Hamoud A. Al-Anazi, SPE, Mohammed A. Bataweel, SPE, and Adel A. Al-Ansari, SPE, Saudi Aramco Copyright 2009, SPE/IADC Drilling Conference and...
Proceedings Papers

Paper presented at the IADC/SPE Drilling Conference, February 21–23, 2006
Paper Number: SPE-99068-MS
... Abstract Conventional drilling and completion fluids containing weighting solids or hydrocarbons or halide brines can create problems with hydraulics, well control, well integrity and well productivity in HPHT operations. The negative influence of conventional fluids on drilling and completion...
Proceedings Papers

Paper presented at the IADC/SPE Drilling Conference, March 2–4, 2004
Paper Number: SPE-87204-MS
... national environmental requirements. Introduction After finishing the drilling and cementing operations of oil and gas wells it is normally necessary to displace the drilling fluid system with a completion fluid. Completion of the well requires the use of a packer fluid in the annulus between the casing...
Proceedings Papers

Paper presented at the IADC/SPE Drilling Conference, March 2–4, 2004
Paper Number: SPE-87126-MS
...-control screens, thereby creating in some cases the need for a solids-free environment for the completion. Unfortunately, because of problems related to emulsion blocking when mixing filtrate from oil-based drilling fluid and water-based completion fluid, displacing to brine after drilling with oil-based...
Proceedings Papers

Paper presented at the SPE/IADC Drilling Conference, February 19–21, 2003
Paper Number: SPE-79905-MS
... chemistry upstream oil & gas operation cement sheath design completion fluid well event cement sheath halliburton displacement fluid integrity sheath reservoir Copyright 2003, SPE/IADC Drilling Conference This paper was prepared for presentation at the SPE/IADC Drilling Conference held in...
Proceedings Papers

Paper presented at the IADC/SPE Drilling Conference, February 26–28, 2002
Paper Number: SPE-74541-MS
... evaluated as a potential drilling and completion fluid, but technical hurdles could not be completely addressed in time for the first well. As a result of well control problems occurring in the first well, with barite sag in the oil based drilling fluid as a contributing factor, it was necessary to use a...
Proceedings Papers

Paper presented at the IADC/SPE Drilling Conference, February 23–25, 2000
Paper Number: SPE-59191-MS
... Abstract High-density formate brine-based drilling fluid systems have emerged asviable reservoir drilling and completion fluid options for deep high-temperature wells. Upon their commercialization in the early 1990's, these systems were shown to possess a unique combination of properties that...
Proceedings Papers

Paper presented at the SPE/IADC Drilling Conference, February 28–March 2, 1995
Paper Number: SPE-29409-MS
...·~ ~· . D ~oclety ol PetroleLm Engineers SPE/IADC 29409 ,· Use of a Novel Drill-In/Completion Fluid Based on Potassium Formate Brine on the First Open Hole Completion in the Gullfaks Field 0jvind Svendsen* and J.K. Tofteh, Statoil, and D.S. Marshall* and C.L. Hermansson,* Baker Hughes INTEQ *SPE...

Product(s) added to cart

Close Modal