... measurements is controlled by the vertical sampling rate of the tool and the sensor size. This new measurement method has been validated with Lab measurements. The test fixtures with varied annulus spacings were designed, constructed, and cemented. Multiple tests were designed and conducted to verify...

... that using CT can provide economic benefits for creating the barrier compared to more conventional drilling or workover rigs. Coiled tubing operations Upstream Oil & Gas condensate assembly Completion Installation and Operations sandstone permanent reservoir barrier test fixture platform...

... detonation requirement strength wireline operation coiled tubing release device Exhibition test fixture Completion Installation and Operations weakpoint deployment conveyance qualification program fishing operation cable next-generation release device instrumented sub gun string electrical...

... and linear (or sliding) test fixtures. The rotational friction testers are designed to simulate the drill pipe rotation for the conventional drilling application. The rotational friction tester typically measures CoF from 0.04 to 0.10 ( Barraez et. al., 2014 ). As the average CoF observed in CT...

... use are minimized, and rig campaign schedules can be maintained almost without delay. Completion Installation and Operations Upstream Oil & Gas BHA test fixture Well Intervention orientation deployment flapper orientation production enhancement wedge assembly cavity flapper sl...

... operations connector CT string requirement internal pressure assembly external pressure deployment test fixture society of petroleum engineers platform spoolable connector test result Norwegian Sector Introduction Even though coiled tubing offers operational flexibility, it comes...

... conditions. The initial test objectives were (1) to functionally test the anchor and hinge mechanism; (2) test the TT Whipstock system inside a test fixture and successfully mill a window; (3) evaluate various mill configurations utilizing the TT Whipstock system. The second test objectives were (1...

... using a modified form of the ASTM G75 abrasion test. This test is performed with a test fixture that repeatedly slides test blocks over stationary test laps with a controlled normal force and in the presence of an intermediary fluid. In the tests reported in this investigation the blocks were made from...