1-16 of 16
Keywords: pressure test
Close
Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Proceedings Papers

Paper presented at the SPE/ICoTA Well Intervention Conference and Exhibition, March 24–25, 2020
Paper Number: SPE-199827-MS
... Oil & Gas hanger valve society of petroleum engineers assembly control line lower completion concentric hanger pressure test A high water cut Brent oil producer that requires Concentric Gas Lift for the well to flow at an economic rate. A Concentric Gas Lift system consists of an...
Proceedings Papers

Paper presented at the SPE/ICoTA Well Intervention Conference and Exhibition, March 24–25, 2020
Paper Number: SPE-199855-MS
... isolation and reduction in fluid loss achieved after the first 20-bbl batch. An additional 10-bbl batch was pumped to help ensure isolation. Pressure tests and fluid loss after the second treatment indicated almost 90% of the open perforations in the depleted zone were isolated with minor losses observed...
Proceedings Papers

Paper presented at the SPE/ICoTA Well Intervention Conference and Exhibition, March 24–25, 2020
Paper Number: SPE-199804-MS
... the setting time, a successful pressure test or post-cleanout DTS (in case pressure test is not feasible) was used to establish the reliability of this method. The first attempt was made on Well A of the field; however, isolation was successful using m-OCP and conventional CT. Operation execution and...
Proceedings Papers

Paper presented at the SPE/ICoTA Well Intervention Conference and Exhibition, March 26–27, 2019
Paper Number: SPE-194233-MS
... CT string injector head Upstream Oil & Gas spoolable connector spoolable dimple connector force simulation pressure test Completion Installation and Operations Simulation stripper carbide sleeve placement connector wall thickness pipe field trip CT end A spoolable dimple...
Proceedings Papers

Paper presented at the SPE/ICoTA Well Intervention Conference and Exhibition, March 26–27, 2019
Paper Number: SPE-194228-MS
... develop a campaign solution for five velocity string jobs in Bolivia. Upstream Oil & Gas Simulation BHA real-time operation Coiled tubing operations connector CT string BOP lbf slip ram Completion Installation and Operations Bolivia chrome ct velocity string Cth reel pressure test...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing & Well Intervention Conference & Exhibition, March 24–25, 2015
Paper Number: SPE-173689-MS
... understanding of the challenges associated with the technology. Completion Installation and Operations digital slickline technology well logging Upstream Oil & Gas Leak service change log analysis gas lift patch installation artificial lift system electric line service pressure test well...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, March 25–26, 2014
Paper Number: SPE-168245-MS
... squeezed into the wellbore using coiled tubing (CT); (2) the remaining resin blend is cleaned up using CT and a pressure test is performed; (3) the deeper horizon is perforated; (4) a minifrac and temperature survey are performed to evaluate existing perforation isolation; and (5) the fracture stimulation...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing & Well Intervention Conference & Exhibition, March 26–27, 2013
Paper Number: SPE-163922-MS
... wellbore restrictions and deviation. E-line was required to provide power for the wireline tractor because a coiled tubing unit could not access the well slot due to the positioning of the rig on the platform. Additionally, the bridge plug had to withstand a 3,000 psi differential pressure test and hold...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing & Well Intervention Conference and Exhibition, April 5–6, 2011
Paper Number: SPE-142744-MS
... previously perforated? 14 10 4 1.4 Never set a plug in a casing joint where a packer device had been drilled out? 14 9 5 1.6 If using a bridge plug, always require a negative pressure test after setting? 12 13 3 0.9 Always require a positive pressure test after setting the plug? 16 12...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, March 23–24, 2010
Paper Number: SPE-130633-MS
... tested the test is repeated to simulate eighteen months of operation and a pressure test once a week. Open and close the BOP seven times, on the seventh closure, close the locks and release the hydraulic pressure and perform a low pressure test to 200psi hold for 3 minutes, then perform a test at the...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, April 1–2, 2008
Paper Number: SPE-113707-MS
... field parts of the wellhead needed to be changed with inconel inserts due to corrosion while the tubulars are GRE lined. It is required to pressure test the wellheads while having a double barrier in place. To protect the tubulars from corrosion the following options are available: Install alloy...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing Conference & Exhibition, April 4–5, 2006
Paper Number: SPE-100165-MS
... packer Leak lower packer pipe procedure jointed pipe extended-length patch mandrel plug patch assembly packer crane assembly caliper survey pressure test Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 SPE/ICoTA Coiled Tubing and Well...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing Conference & Exhibition, April 4–5, 2006
Paper Number: SPE-99770-MS
...-pressure-rated bridge plug zonal isolation Upstream Oil & Gas high expansion metal-to-metal application restriction pressure test Copyright 2006, Society of Petroleum Engineers This paper was prepared for presentation at the 2006 SPE/ICoTA Coiled Tubing and Well Intervention Conference and...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing Conference and Exhibition, March 23–24, 2004
Paper Number: SPE-89571-MS
... variation pressure test ksi pressure level fatigue behavior ksi material mean life fatigue result alloy material grade hoop stress Copyright 2004, Society of Petroleum Engineers Inc. This paper was prepared for presentation at the SPE/ICoTA Coiled Tubing Conference and Exhibition held in...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing Conference and Exhibition, March 23–24, 2004
Paper Number: SPE-89537-MS
... inflation pressure differential differential pressure pressure rating inflation pressure completion installation and operations spe 89537 bridge plug calculation inflatable element pressure test wellbore isolation drawdown Copyright 2004, Society of Petroleum Engineers Inc. This paper was...
Proceedings Papers

Paper presented at the SPE/ICoTA Coiled Tubing Roundtable, March 7–8, 2001
Paper Number: SPE-68417-MS
... & gas coiled tubing zonal isolation spacer nipple profile pressure test well integrity completion installation and operations kpa cement perforation corrosion cement plug packer corrosion inhibitor line mahbdf reservoir completion equipment plug placement spe 68417 drillstem/well...

Product(s) added to cart

Close Modal