Skip Nav Destination
1-4 of 4
Keywords: steam injection pressureClose
Paper presented at the SPE Canada Heavy Oil Conference, September 28–October 2, 2020
Paper Number: SPE-199943-MS
... simulation heat loss steam injection pressure relative permeability saturation permeability modeling & simulation steam-assisted gravity drainage overburden time step butler interface complex reservoir fluid dynamics oil production simulator steam injection rate steam chamber cumulative...
Paper presented at the SPE Canada Heavy Oil Technical Conference, June 7–9, 2016
Paper Number: SPE-180735-MS
... simulation the impact on the SAGD performance in a point bar deposit reservoir where an overlying top water and an inclined heterolitic strata (IHS) is present. The results show that where the top water is unconfined and the steam injection pressure is higher (4,000 kPa) than that of the top water zone...
Paper presented at the SPE Heavy Oil Conference-Canada, June 11–13, 2013
Paper Number: SPE-165564-MS
... operation parameters to improve the overall reservoir development value. The investigated parameters include well spacing, steam injection pressure, artificial lift method, wind-down and blow-down criteria, and minimum oil rate of edge wells. In the process, reservoir simulation is fully integrated...
Paper presented at the SPE Heavy Oil Conference Canada, June 12–14, 2012
Paper Number: SPE-144149-MS
... pattern with similar number of production wells. The result also indicated that the difference of 10kPa between steam injection pressure and reservoir pressure in literature is not enough for both SAGD and Fast-SAGD operations. And then, this study presented a numerical investigation for evaluating...
Product(s) added to cartClose Modal