... Department of Energy's (DOE's) Utah Frontier Observatory for Research in Geothermal Energy (FORGE) program, highlights some of the technical challenges, which include drilling an accurate vertical section, a curve section, and a 5300-ft 65° tangent section in a hard granitic formation at temperatures up...

... average removal efficiencies of 75% of the stagnant liquid volume. The experimental facility consisted of an experimental flow loop, that replicates conditions of liquid-loaded horizontal wells, with a horizontal section of 40 feet and a vertical section of 40 feet. The method is based on the chamber lift...

... system production logging vertical section production monitoring upstream oil & gas production control drilling operation gas slug variation evaluation slug regulator information new downhole gas regulator elongated bubble flow bubble flow production profile gas bubble pump intake...

... Altun drilling fluid chemistry fracture flow behavior well control drilling operation vertical section leak-off test horizontal well pump pressure drilling fluid property different flow behavior relation drilling fluid formulation vertical well drilling fluid selection and formulation...

... ports placed in the pipe wall in horizontal and vertical sections of the pipe. The particle concentration in the liquid-sand sample is compared with the flowing bulk concentration to find the best representative sampling practice. Computational Fluid Dynamics (CFD) simulations are conducted for various...

... cases. The observations to explain these findings and the comparison of the tested EOT locations in handling SS were discussed. production control Directional Drilling curvature completion production monitoring drilling operation vertical section kickoff point liquid holdup production...

.... Experiments were conducted in a facility with a 2-in. ID and 62.6-ft. long lateral section and a 41-ft. vertical section, which mimics a horizontal well. Four well configurations were considered; namely, toe-down, toe-up, one-undulation with a sump and one-undulation with a hump. Additionally, different flow...

... drillpipe drilling operation CDP pitch length Miska drillstring design friction ADP different category configuration helix wellbore contact force equation Directional Drilling vertical section boundary condition axial force transfer frictional force society of petroleum engineers...

... the device to be tested closely to either the separator or the inlet of the vertical section, such that slugs cannot reform before they exit the system or before the flow conditions change (downstream of the inlet of the vertical section –inside the smaller diameter tubing for openhole completions...

... by providing a step change in steering technology, trajectory-following algorithms, and downhole survey method. drilling operation high-dogleg rss rss spe 166165 spe annual technical conference lateral section continuous azimuth azimuth directional drilling vertical section continuous...

... psia production monitoring directional drilling fluid velocity upstream oil & gas horizontal section vertical section production logging pvt measurement fluctuation spe 158500 sand face pressure terrain flow instability liner transient multiphase simulator geometry fluid bubble...

... is becoming more common, and increased knowledge for T&D modeling and interpretation is needed. drillstring design software program wellpath upstream oil & gas friction factor amplitude coefficient drilling operation side force torque modeling & simulation vertical section spe...

... directional drilling vertical section williston basin drilling operation durability conventional elastomer elastomer lateral section arkoma basin spe 145635 torque output average distance application bakken formation differential pressure power section province upstream oil...

... kentucky west virginia completion rig assembly pdm-tc assembly lower huron rop lateral torque rss drilling operation rotary steerable system drilling vertical section directional control lateral length society of petroleum engineers upstream oil & gas Introduction EQT...

... of three sections: horizontal, curvic, and vertical sections. Let L i , R i , and H i denote the length of the horizontal section, radius of curvature of the curvic section, and length of the vertical section of lateral, respectively. Assuming the pressure losses in the horizontal sections...

... flow rate society of petroleum engineers wax inhibition flow assurance hydrate remediation procedure horizontal section fluid level wax remediation water cut vertical section scale inhibition header uninhibited water methanol Introduction Upon shutdown, gravity causes the fluids...

... and operational results. commercial system reliability rotary steerable system flexibility pafitis spe 63247 directional control directional drilling systems and equipment vertical section objective spe 63247 steerability field result stuart schaaf upstream oil & gas schlumberger drilling...

... horizontal well drilling operation vertical section failure rate pearsall field beam pumping packer type gas anchor anchor oryx energy production rate artificial lift system rod guide directional drilling pump intake pressure upstream oil & gas lateral gas interference...

.... The entire model was discretized in two dimensions in order to accommodate the finite difference form of the equations. The simulator provides for variable size rectangular blocks on the face of a vertical section (See Figure 1). SOCIETY OF PETROLEUM ENGINEERS OF AIME 6200 North Central Expressway Dallas...