1-20 of 458
Keywords: simulator
Close
Sort by
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-214864-MS
..., pre-combustion, and post-combustion). Reservoir flow modeling simulations show that CBFF is the best potential waterless fracturing fluid option for fracturing unconventional shale reservoirs in the Burgos Basin. We conducted fracturing simulations to obtain the fracture geometry resulting from pure...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-214959-MS
... data collected during the post-treatment flowback activity is used in simulating bottomhole (BH) production rates with the help of calculations. Using Gaussian solution scheme, the BH rate is distributed amongst the various perforation clusters while incorporating the effects of key hydraulic fracture...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-214920-MS
... fracturing materials geological subdiscipline reservoir characterization wellbore fracture geometry hydraulic fracture permeability fracturing fluid hydraulic fracturing reservoir surveillance production control base case simulation equation drillstem testing production logging petroleum...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-214992-MS
...) to demonstrate the importance of injection induced fractures on the design and placement of ICDs in horizontal injectors. A fully coupled reservoir-fracture-wellbore simulator is applied to study the performance of injectors with ICDs. The simulator implicitly couples the performance of the ICDs with multi...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-214849-MS
... simulation has been developed by generalizing the concept of inflow performance relationship (IPR). IPR is traditionally used for representing the quantitative relationship between flow rate and bottom-hole pressure (BHP) or tubing head pressure (WHP) of a well. With stability proxy, IPR-like relationships...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-215059-MS
... reduction, and shear rate and salinity effects on polymer viscosity were modelled utilizing the capabilities of the coupled MRST-IPhreeqc simulator ( Todd and Longstaff, 1972 ; Al-Shalabi et al., 2022 ). An overview of the input data used by the coupled MRST-IPhreeqc simulator has been given in Table 2...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-215090-MS
... Abstract NMR T2 simulation supplements laboratory experiments that numerically predicts petrophysical properties of digitized rock samples. Recent research demonstrated that the pore shape irregularity acts as surface roughness at the macroscopic point of view and its effect on NMR T2...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-215110-MS
... sampling refinement method (ISR) to update the proxy during optimization with the popular stochastic simplex approximate gradient (StoSAG) and reservoir- simulations runs for a synthetic example considering a waterflooding process in a conventional compositional oil reservoir with 2 water injectors and 4...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 16–18, 2023
Paper Number: SPE-215160-MS
... upstream oil & gas geology reservoir simulation hydraulic fracturing modeling & simulation production control wellbore drilling operation drilling fluids and materials operation production monitoring emission optimization problem completion installation and operations artificial...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 3–5, 2022
Paper Number: SPE-210016-MS
... Table 1 K -value parameters for gaseous solvents. Component K 1 K 4 K 5 Methane 545.470 –879.84 –265.99 Propane 900.850 –1872.46 –247.99 n -Butane 858.810 –2154.9 –238.73 Table 2 Reservoir simulation description and reservoir properties...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 3–5, 2022
Paper Number: SPE-210133-MS
... Abstract Full history match models in subsurface systems are challenging due to the large number of reservoir simulations required, and the need to preserve geological realism in matched models. This drawback increases significantly in big real fields due to the high heterogeneity...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 3–5, 2022
Paper Number: SPE-210120-MS
... interactions during LSP flooding through varying overall salinity as well as the concentrations of monovalent and divalent ions. In this study, the MATLAB Reservoir Simulation Toolbox (MRST) was coupled with a geochemical interface module i.e., pH-Redox-Equilibrium in C programming language (PHREEQC), termed...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 3–5, 2022
Paper Number: SPE-210200-MS
... Methods In this section, we first review the stochastic simplex approximate gradient method (StoSAG) and discuss how we handle constraints with the StoSAG method. Note that we apply StoSAG directly to a commercial simulator based on a high-fidelity compositional simulator (CMG-GEM). We then review...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 3–5, 2022
Paper Number: SPE-210193-MS
... maintaining the accuracy of numerical simulations and completing simulations fast enough for sensitivity analyses. In this work, we describe how we addressed all these challenges in building our proprietary hydraulic fracturing and geomechanics simulator. We solve the single phase porous flow equations along...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 3–5, 2022
Paper Number: SPE-210281-MS
... inhibition asphaltene inhibition upstream oil & gas remediation of hydrates production chemistry hydrate remediation production monitoring paraffin remediation equation of state deposition prediction wax inhibition cloud computing production control real time system simulation hydrate...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 3–5, 2022
Paper Number: SPE-210304-MS
... The size and quality of the window represent the simulation’s scope or depth, while the exterior landscape's clarity represents the level of fidelity. Traditionally, most drilling simulator training has been limited to well control, crew and equipment training, and certifications. But now...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, October 3–5, 2022
Paper Number: SPE-210363-MS
... foundation for fluid formulation and proppant concentration design. The design optimization with a multiphysics simulator minimized the fluid volume while ensuring conductivity and lateral coverage. Finally, the equipment layout and rate distribution among pumps was planned so that the slurry pulses formed...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, September 21–23, 2021
Paper Number: SPE-206178-MS
... conditions for high temperature applications. More so, consider 10B-2 guidance valuable for proving benchmarks in the high temperature domain. Therefore, numerical temperature simulators help manage the risk by predicting the anticipated bottomhole cementing temperatures. Currently several temperature...
Proceedings Papers

Paper presented at the SPE Annual Technical Conference and Exhibition, September 21–23, 2021
Paper Number: SPE-206166-MS
... to move) or deviation of production design point. A computational fluid dynamics (CFD) simulation was developed and benchmarked by experimental data, thus CFD results for different scenarios and various choke geometries were used to build a risk analysis matrix, which allows the definition of the optimal...

Product(s) added to cart

Close Modal