... enhanced recovery drillstem/well testing conservative assumption assumption reservoir layer petroleum engineer injection waterflooding caprock compliance waterflood development wi-2 drillstem testing reservoir downhole monitoring fall off test integrity lower reservoir unit fracture...

... on the wellbore temperature responses. Information on the coupled reservoir/wellbore model and the optimizer will be provided. machine learning Artificial Intelligence Reservoir Surveillance regression layer permeability production monitoring Upstream Oil & Gas skin value reservoir layer...

... of the tested reservoir layer. Matching of the transient-test data also provides estimates of the conductivity of the zonal isolation, which leads to computing the transient cross-flow rates. pressure differential zonal isolation transient-pressure behavior reservoir layer Upstream Oil & Gas...

... reservoir layer Formation Resistivity resistivity downhole electrode bsem source source configuration surface electric field Marsala DCS electrode counter electrode electromagnetic imaging society of petroleum engineers current flow Introduction Maximizing the recovery factor by means...

... survey water production reservoir layer trajectory upper reservoir layer efficiency inversion reservoir seismic data offshore carbonate reservoir spe 166247 water injection inj-b trajectory brazil carbonate reservoir society of petroleum engineers Introduction The Albian-B...

... Abstract The first Borehole to Surface Electromagnetic (BSEM) pilot field survey in the Kingdom of Saudi Arabia (KSA) was successfully executed to identify oil and water bearing reservoir layers in a carbonate oilfield water injection zone. Maximizing recovery factor by means of detailed...

...-well thermal model of flow from the reservoir layers by varying the pressure support from injectors. Once this is achieved, the model can be used to simulate the expected oil production resulting from either changing the ESP pump rate in the producing well or by changing the pressure support...

... rate can then be calculated. Thus installing the fiber outside the sand-screens gives a unique, direct measurement of individual reservoir layer drawdowns, enabling the effects of differential depletion to be monitored over time. This paper outlines the completion technology used to install...

... reservoir layers. We also show that in addition to flow rate determination, layer pressure changes smaller than 10 psi can be detected by changes in the measured temperature profile, as long as there is no breakthrough of gas or water. The model is also used to define the limits of the technique's operating...

... azeri field layer permeability flow rate completion permeability packer reservoir surveillance reservoir layer upstream oil & gas reservoir production control dts system swell packer society of petroleum engineers production logging production monitoring layer pressure temperature...