.... If a liquid with gas entrainment is flowing through the tube, the drive gain will be increased significantly ( Benlizidia, 2023 ). Full diagnostic check that was performed by Coriolis Meter's manufacturer showed that the drive gain was exceeding the allowable threshold, which indicated gas entrainment...

... quantification limitation bh assay manufacturer serial dilution bacteria canada atp detection pouch hydrolase Introduction Microbiological contamination can cause detrimental effects to infrastructure and equipment within the energy industry. Corrosion, fouling, plugging, scaling, and slime...

... analysis operation regime frequency regime deep learning lifespan prediction lstm algorithm determination lifespan prediction sem manufacturer Introduction Based on the above views, this study introduces a novel method for dynamic survival analysis and lifespan prediction of ESP...

... Abstract The results of API RP 19B Section 2 tests conducted at eight charge manufacturer's testing facilities were used to determine whether differences in vessel size and configuration resulted in different depth-of-penetration results. Findings from these round-robin tests were also used...

... One of the difficulties at this point was building a realistic timeline. Both the specialized component manufacturers and the equipment fabricators were in the midst of possibly the largest build-out of custom pressure pumping equipment in history, due to the unprecedented need for capacity...

... selection dva well test specimen specimen manufacturer connection design connection qualification envelope project team testing requirement tubular connection pipe delivery qualification connection usage envelope requirement iso 13679 Strings installed in the water column: 16″ and 14...

... erosion artificial lift system flow test flow rate flow control device manufacturer valve gas-lift fcd Introduction Gas-lift is one of the commonly used artificial lift methods to produce well fluids from wells already dead or to accelerate the production rate from flowing wells. Gas-lift...

... and dynamometer card have been diagnosis tools in the field, which have been boosted by the portable computers. However, none of these tools is able to generate the pump performance curve equivalent to those provided by the electrical submergible pump (ESP) or progressive cavity pump (PCP) manufacturers. Piston...

... scope, the cost savings of non Duplex-CRA tubing is significant; thus the GRE manufacturer is now running the qualified product in many other deepwater projects for a variety of operators. As a result of this testing and qualification, GRE-lined tubulars are now being used for the majority of BP...

... and technical support to achieve the objective. Only by working together under one project can this be realized. Discussions over recent months with several major operators have identified positive support for this initiative which gives confidence for the future of the Project. Theory Manufacturers have...

... exclusion products by uniquely qualifying an individual product design which includes retention media, metallurgy, subcomponents, manufacturing process, and the final assembled product. The technical evaluation is based on a 2-tier qualification process that "uniquely qualifies" products for purchase...

... & Simulation Upstream Oil & Gas drilling operation casing and cementing eccentricity spe annual technical conference collapse resistance Exhibition pipe manufacturer equation expansion ratio material property post-expansion property application ultrasonic inspection society of petroleum...

... casing and cementing Upstream Oil & Gas cement chemistry cement formulation cement ppg application slurry clinker ASTM cement spe 102184 BHCT manufacturer API well cement strength silica flour consistency stability density 15 silica ii cement requirement well cement retarder...

... In the 1970s the stimulation industry organized a subcommittee under the guidance of the API to establish recommended practices for proppant quality at the well-site. This sub-committee was composed of members representing the entire supply chain (e.g. mining, manufacturing, pumping service...

... censored data, is essentially the only reliable method of evaluating ESP system performance (and other types of time-to-event data). manufacturer artificial intelligence motor series cable manufacturer interaction final model current model covariate artificial lift system assumption...

... as a case study substance chemical industry service company evaluation application importer reach system assessment proposal manufacturer regulation specialty chemical information european parliament spe 90386 registration requirement supplier risk management downstream user...

... are developing a trials prototype in a Joint Industry Project, sponsored by Amerada Hess, BP, Chevron and Shell. upstream oil & gas coiled tubing manufacturer downhole video imaging spe 71465 optically john artificial intelligence high resolution log analysis well intervention production...

... and gas industry and usually end up with a patented solution. Thus, scientific and commercial interests often tend to overlap in a sector of the oil and gas market where competition gets intense. MFM manufacturers have to act quickly in order to secure the implementation of a particular technology before...

... sbm-500 multiphase pump subsea system subsea multiphase pumping system atalaia multiphase flow test site increment application pressure manufacturer Introduction In Campos Basin, the giant Marlim Field will host the world's first prototype of a subsea multiphase pumping system in deep...

.... Design examples for both extended-reach and high-pressure applications demonstrate the effectiveness of this method. directional drilling general string design method manufacturer completion installation and operations string makeup drilling operation spe 63251 operational depth requirement...