... injection well to sustain the target injection rates with proper designed well construction under operating conditions. Inflow Performance Relationships (IPR) and Vertical Lift Performance curves (VLP) were developed for predicting the temperature and pressure profiles from the wellhead to sandface under...

... bacteria waterflooding coating geology enhanced recovery mineral oxygen pipeline frequency seawater best practice corrosion product injection well excursion water injection system oxygen corrosion stage-gate process corrosion solid operation injection pipeline design option water...

... option transportation depleted gas tax credit injection well Introduction Climate change, driven by the increase of greenhouse gases in the atmosphere, is one of the most pressing global challenges of our time. The burning of fossil fuels, deforestation, and various industrial processes have...

... device inflow control device coefficient fracture propagation porosity directional drilling enhanced recovery icd propagation iif sharma particle injection well simulator injector Introduction Despite being studied for many decades, injection-induced fractures (IIFs) still receive...

... data set consists of distributed temperature sensing (DTS) data acquired at the injection well and a monitoring well, flowing bottom-hole pressure data at the injection well, and time-lapse pressure measurements at several locations along the monitoring well. The history matching results indicate...

... optimization problem drilling operation vertical section cutter exhibition drill bit bha average rop utah forge artificial intelligence upstream oil & gas bit dull photo rop injection well drilling conference v-shaped cutter rotation speed footage petroleum engineer tangent section bha...

... due to a poor consolidation of the reservoir. The ongoing waterflooding process has a well defined five-spot pattern where injection wells have selective strings installed, and production is commingled. Under these conditions, shut-in wells for reservoir pressure acquisition are challenging activities...

... injection well producer well scenario simulation waterflood performance permeability macroscopic displacement Introduction Oil demand has risen considerably at rate of 2.9% in recent years (BP 2019). Meanwhile, worldwide oil production is still largely plagued by declining rate and maturing...

... injectivity completion installation and operations reservoir simulation drillstem/well testing injection well neutron log fracture treatment technology conference case history increase reservoir contact proppant technology la cira-infantas field hydraulic fracturing fracturing fluid colombia...

... property reservoir geomechanics co 2 Injection history Reservoir Characterization pore pressure injection well Upstream Oil & Gas effective stress aquifer in-situ stress permeability aquistore injection well vertical cross section deadwood formation observation well Injection Rate...

... pressures but also to increase oil production in SAGD late life. SAGD lower well steam chamber saturation zone steam-assisted gravity drainage SAGD chamber composition situ combustion reservoir injection thermal method Upstream Oil & Gas steam injection injection well peak...

... composition injection well water treatment gun barrel facility small particle produced water discharge particle diameter filter cake hydraulic fracturing water quality impairment contaminant particle shale characteristic Permian permeability Introduction One of the objectives...

... the interference pressure data. The MWIT model is established to investigate the effect of multiple injection wells on transient-pressure behavior of the MFHW. Due to the interferences from injectors, the pressure and pressure-derivative curves of MWIT move down beginning with the biradial flow regime for single...

... simulation injection well damage zone injection In this paper, we developed a general modeling tool for the analysis of fault slippage in large-scale CO 2 sequestration projects. At a large regional scale, it might be computationally expensive to represent fault heterogeneities in detail and run...

... enhanced oil recovery projects (such as waterflooding) while also utilizing existing infrastructure in the field. This paper focuses on one method of doing this by converting watered out or poor-performing horizontal production wells into horizontal water injection wells. The goal of this study...

... Abstract The production of both fines and matrix sand into the well bore is a common problem in water injection wells due to transient pressure and flow events. Conventional sand control techniques do not manage these transient events effectively, and the reliability of the sand control can...

... is required. This paper is an example from the Quest CCS operation in Alberta, Canada. Quest commenced operation in August of 2015 at a rate of 1 MT/year into two injection wells. After two years of operations, the project’s rigorous monitoring program has demonstrated that the reservoir is behaving...

...), while the presence of aquifer support is engaged by adding a pseudo injection well, to mimic influx support, and adjusting the injection rate to reach the best possible match quality. As for the new modeling equation, it performs very well when compared to current CRM equations, has fewer variables...

... in a newly developed field located in the Egyptian Western Desert. Initially, a specific area of the field started to experience a decline in reservoir pressure. The operator decided to drill a new injection well to provide the required pressure support in this area. Unfortunately, the amount of water...

... twelve wells which completing the first cycle huff-puff, and six wells have completed the second cycle. Meanwhile, in order to keep the formation pressure and reduce the channeling risk, selected three high water-cut production wells were changed into injection wells for weak gel flooding pilot. After...