... devices (ALD's), a method called Backsweep (Patent application 17095440) was proposed by Croce and Zerpa (2021) . The method relies on intermittent gas injection to remove the stagnant liquid from the horizontal section, clearing the way for the gas incoming from the reservoir to flow to the wellhead...

...Introduction Abstract Machine learning is a powerful tool that has become an essential part of the oil and gas industry that provides additional insights at limited data availability. In the vertical section, representative samples can be obtained, but in the horizontal section, core...

.... The distribution of the valve is designed based on the formation permeability distribution of the horizontal section, the oil-water viscosity ratio and well trajectory. With the integration of the ICD/AICD screen and the annulus continuous-barrier, the purpose of equalizing production profile of the horizontal...

...-degree horizontal, sump or hump well trajectories always have higher capacity to transport sand compared to toe-up and toe-down trajectories. Thus, it helps in delaying the plugging of the horizontal section, sustain well production and reduce sand cleanout requirements. In addition, the toe-up...

... Abstract More than 35 million m 3 of oil have been produced from the Mittelplate oilfield. Poor hole cleaning has been identified as a root cause for drilling problems in the horizontal sections of its ERD wells. Enhancing cutting removal in vertical wells, high-viscous pills are typically...

... Completion Installation and Operations Upstream Oil & Gas metric horizontal section Efficiency Pump Rate fluid consumption drilling operation fluid bypass velocity BHA frac plug bypass pump-down operation consumption pump-down efficiency wellbore society of petroleum engineers...

... two years show that 80% of the fluid produced from the 502-meter horizontal well is mainly contributed to the first 90-meter horizontal section. Experimental results of core flooding under excessive water flooding (2000 pore volume) indicate that the permeability is 1.4 times of the original...

...) models of MFHW hardly consider the effect of non-uniform production rate distribution of both horizontal sections and hydraulic fractures on pressure-transient response, which may lead to erroneous results. This paper aims at presenting an innovative approach to estimate non-uniform production rate...

... steam injection in a mobile heavy oil reservoir, which were: What is the mechanical reliability and operability of horizontal steam injectors? Can acceptable steam conformance control along the horizontal section be achieved? Can steam conformance along the horizontal section be quantified...

... Drilling inclination angle catenary curve Artificial Intelligence trajectory design horizontal section body frame well planning Upstream Oil & Gas type well constant curvature curve Spline prototype algorithm downhole drilling automation drilling operation curvature correction path...

... production logging Flow profile steam-assisted gravity drainage steam injection flow profile production monitoring Artificial Intelligence horizontal section application temperature differential Surveillance data packer differential algorithm Upstream Oil & Gas Steam Injector fiber DTS...

... horizontal section China breakout image log trajectory Horizon Slice horizontal well reservoir permeability orientation geomechanical model placement geology society of petroleum engineers Introduction The third horizon slice ( Fig. 8 ) was selected 10msec below the top of the target...

... of drillstrings made of SDP, TDP, ADP and CDP are compared. For a limited amount of compressive force provided at the beginning of the horizontal section, different categories of pipes (in the horizontal section of the well) take on different configurations. In addition, along a drillstring some parts remain...

... and a 14 API oil. This paper presents most of the challenges the operator had to overcome to drill, gravel and test two wells already with great success. Both wells have a casing program composed by 36″/16″/11 7/8″ and an horizontal section of 800m drilled in 9½″. Due to the 14 API oil the artificial lift...

... was drilled to test the full potential of this kind of construction, which included and OHHGP, and to validate the field development concept. However, crucial problems were faced during the drilling and completion phase. Directional control problems led to two sidetracks. The horizontal section experienced...

... with relatively short horizontal section, and scenario 3: a deviated well with relatively long horizontal section) with the transition foam quality between the two flow regimes (f g *) around 75-85% showed that significant differences in drilling hydraulics calculations might occur when the conventional technique...

... directly threatened future development plans. To reverse these trends, a novel dynamic diversion technology for hydraulic fracturing treatments was implemented with positive results. This technology improves distribution of hydraulic fracturing treatments along the horizontal section of the wells...

... fluid distribution into the induced thermal and natural fractures, thereby optimizing injection profile along the well path, especially for seawater flooding wells. directional drilling completion monitoring systems/intelligent wells enhanced recovery drilling operation horizontal section icd...

... horizontal section well logging peregrino field reservoir characterization trajectory information inversion inversion software horizontal well resistivity extra-deep resistivity inversion result spe 166309 drilling target sand brazil boundary resistivity measurement extra-deep resistivity...

... in the project economics. production logging horizontal section production control upstream oil & gas reservoir surveillance efficiency ocelote field icd isolation system completion design spe 159743 isolation system implementation permeability profile ocelote sw8h sand control gravel...