... Abstract One of the critical steps in managing water injection (WI) systems is developing a feasible, practical, and cost-efficient plan to control the solids from different modes of corrosion in the water injection line. This paper discusses a stage gate process to identify and quantify...

... Petroleum engineers ensure that the wells have been drilled and constructed in a way that protects the completion from internal and external corrosion ( Askari et al. 2021 ). In all well types, several surface casings are run before the final production casing, of which many of them are cemented...

... consideration is motivated by practical usage of predictive modeling in industrial applications. The end user (for example, a corrosion engineer in this case) often possesses certain domain-specific knowledge or is bound by certain tasks when using the predictive model. These prior circumstances may favor...

... Abstract For downhole casing integrity applications, high-resolution acoustic imaging is a novel approach for quantifying casing thickness, corrosion, and mechanical damage defects by measuring both inner diameter and outer diameter wall losses. The technology deploys high-density solid-state...

... method for sand and heavy oil production; however, CO 2 presence in the form of carbonic acid, generates corrosion and pitting on the carbon-steel section of the Progressing Cavity stators. This condition results in short run life for PC pumps with standard materials historically installed. Taking...

... Abstract Oil production in North Kuwait (NK) asset highly relies on artificial lift systems. The predominant method of artificial lift in NK is electrical submersible pump (ESP). Corrosion is one of the major issues for wells equipped with ESP in NK field. Over 20% of the all pulled ESPs...

... is due to corrosive water flow from shallow aquifer formation. Therefore, an immediate remedial action is required to improve well construction. A successful worked over well with integrity issue as a casing leak was repaired by cement squeeze into across the corroded casing interval, which enhanced...

... Abstract Standalone screen has been widely used as sand control solution in oil industries for over a century. Screen plugging and impairments by formation fines, scaling and corrosion cost oil and gas industry significant amount of resources. This study presents a detailed study...

... & Gas shale gas oil shale strength application corrosion cathodic dopant hydrolytic degradation dissolution concentration dissolvable elastomer degradation dissolution rate plug degradable elastomer wellbore base metal degradation rate low-temperature dissolvable metal dissolvable...

... Upstream Oil & Gas selection consideration production rate artificial lift system flow rate run life application beam pumping artificial lift strategy ESP system corrosion Sample Well Design Consideration ESP workflow artificial lift method society of petroleum engineers...

... and steps were taken to clear the obstructions. The NKJ fluids are highly corrosive and a corrosion inhibitor is injected at the wellhead to protect the surface pipelines. Addressing all these challenges require thorough knowledge of the specialized subjects and advance modeling to improve the field...

... indicated that the failures were primarily the results of corrosion and solids, and lack of close monitoring of ESP performance review, which prevented rectification of the problems in a timely manner. Secondary problems were also identified, such as tight wellhead clearance that damaged wellhead...

... and techniques will be discussed. No external cables or other smart well components were damaged during the 129 perforating operations. orientation presentation gravity completion installation and operations blast protector clamp sensor upstream oil & gas corrosion torque horizontal well...

... drillstem testing quantification gas reservoir corrosion sample chamber gas sample upstream oil & gas adsorption metal surface mercury mercury measurement drillstem/well testing formation tester mercury concentration filtrate reservoir contamination spe 166220 Introduction...

... casing modeling spe 147189 wellhead drilling operation spe drilling conference diameter drillstring design riserless environment example 4 buckled pipe upstream oil & gas casing-running operation corrosion inclination example 3 casing-running analysis wellbore quality actual data...

... fluid compatibility debris incident continuous chemical injection statoil society of petroleum engineers vacuum condition leak consequence capillary line scale inhibitor corrosion integrity spe 146625 check valve chemical injection system chemical injection valve valve When...

... Abstract Seawater Injection Mobile System (SWIMS) is a novel concept involving the use of portable equipment (high pressure pumps, tanks, filters and hoses) to take seawater from the ocean, treat it with anti-corrosion and anti-bacteria chemicals, pump it at high pressure's into a well...

...Introduction Abstract Unexpectedly, numerous stress corrosion cracking failures of production tubing have occurred from the external surface (annular side), rather than from the internal (production side). This problem is encountered frequently in HPHT wells and is termed annular...

... Abstract Over the past several years, a substantial increase in deep water exploration and production has brought new challenges to corrosion and material technology. The production environments in deep wells normally involve high temperature, high pressure, and sweet/sour gas. These severe...

... flowline corrosion Pipeline Corrosion materials and corrosion Upstream Oil & Gas riser corrosion well integrity Subsurface Corrosion corrosion inhibitor inhibitor corrosion rate Brine inhibitor effectiveness corrosion 2002 nitrate concentration Effectiveness Inhibition...