... velocities greater than 57 us/ft). Compare Log Sections Abstract To achieve a more consistent and disciplined approach, and to achieve a higher rate of accurate conclusions, a cement bond log interpretation method has been organized and applied to hundreds of operations around the world. This method...

... reservoir pressure. In addition, the expected lifetime of the well is increased by several years. The conclusion is that the earlier the separator is installed, the greater the total well income. In addition, details regarding not only multi-lateral wells through level 5 junctions but also production string...

... asphaltene inhibition calibration subsurface safety valve scale obstruction production loss intervention gas rate scale removal production optimization mechanical calibration scale inhibition remediation of hydrates concentration scale inhibitor gas well pilot test liquid loading conclusion...

... of petroleum engineers technology transfer Technician Oman personnel key component innovative partnership assembly manufacturer conclusion operator rfp Introduction The initial genesis of the project began in late 2010 with a meeting between an executive of the Oman Oil Company (OOC), its...

... will better remember information/knowledge which they spend effort to acquire or find. Certainly, knowledge acquired as conclusions from observations would never be forgotten. Therefore, we conducted two case studies where students, for each case, were divided into two groups of equal academic strength. One...

... environment, a measurement difference can be noticed even when comparing two identical gauges ( Kikani and Fair, 1997 ). Diagnostic plots of pressures recorded during RIH (run in hole) and POOH (pull out of hole) have been used to analyze the data sets available. The conclusion of the study comprises...

... & gas voi technique accuracy information competent engineer assurance activity calculation test accuracy strategic planning and management artificial intelligence new information competency assessment assessment competency decision tree engineer conclusion competency assurance audit...

... with experimental data obtained from flow loop where liquid loading condition was investigated, it was observed that any gas condensate well producing above a critical rate of 12 MMSCF/D will produce in an unloading manner. OLGA, a 3-phase transient multiphase flow simulator was used to confirm the conclusion...

... initial productivity selection productivity conclusion adjustment tunu spe 158083 perforation artificial intelligence dynamic underbalance porosity conventional perforation productivity performance reservoir dynamic ub mobility dub underbalance Introduction Field and reservoir...

... as a tool for fracture diagnosis. hydraulic fracturing post-injection communication active well extension horizontal well orientation monitor well new fracture fracture orientation fracture spe 160480 upstream oil & gas communication computation conclusion fracture extension...

... valuable insight from the testing involves the possibility of running plunger lift to deviation angles of 70° and greater. The results of the plunger lift testing yielded several conclusions. An important result was that all plungers successfully passed through the X-profile, contrary to industry doubt...

... in this paper are a compilation of the results from numerous simulator runs for gas, black oil and gas condensate cases. These simulator runs included sensitivities on well type and permeability in order to compare recovery and production. Important conclusions pertaining to the recovery of hydrocarbons from...

... the conventional pumpdown plug and perforating method. A five-well group completed with this method is compared to its direct offsets that were completed conventionally to draw conclusions. Initial studies show that this completion method reduces the time and cost to complete a horizontal well while yielding...

... interviewed to better understand the conflicting styles of the two demographics and to develop some conclusions concerning how to best move the industry forward in this new era. work satisfaction attrition establishment disconnect good leader young professional base salary youth culture...

.... Structural Secrecy Data and information are socially distributed. No one person has access to all the data, nor would it be possible for one person to make all of the project decisions on a large project. Specialists in multiple fields collect data in their area of expertise, form conclusions based...

... could produce an additional 1.46 MMbbl of oil and increase their gross revenue by $85,350,000. This indicates that by implementing the new stimulation criteria, there is significant potential for economic success. Conclusions A Spraberry Driver Unit well that has a maximum oil production rate...

... with the buildup period greatly exceeding the flow period have been addressed in the literature by several authors over the last 30 years. The present paper takes a new look at such tests with a primary objective to investigate the possibility of drawing conclusions about boundary effects. Although some...

... and the first ring producers; ultimately resulting in poor sweep (Ev and Ea) efficiencies. waterflooding Modeling & Simulation breakthrough Basal Barrier Upstream Oil & Gas injector depletion conclusion water breakthrough peripheral waterflood producer reservoir reservoir pressure main...

... Abstract Mean time between failure (MTBF) has been the standard for tracking field performance of sucker rod pumped wells but it can lead to improper conclusions and applications. A new method using cycle time and loading can greatly improve the understanding of the true performance of sucker...

... specific risk training is also discussed in light of the results herein with the conclusion that, if risk training does have a beneficial effect, said effects are largely eroded by the passage of time. Finally, we argue that a better understanding of the biases that can affect decisions made within...