... inflow control valve conformance improvement reservoir aicd-valve completion villano field frequency case study Introduction Historically, horizontal well developments in heavy-oil reservoirs with active bottom aquifers have always shown highly elevated water production volumes...

... completion monitoring systems/intelligent wells water breakthrough packer case study Introduction Cased and perforated (C&P) completions are the most common type of completion in the oil and gas industry due to several technical reasons including but not limited to drilling, logging, cementing...

... a more notable problem. This paper looks at a case study to evaluate the effectiveness of a new, multi-layer protective coating to mitigate corrosion damage, extend tubing life and lower operating costs. A major operator sought a solution for their highly corrosive, plunger-produced wells in West Texas...

...Case Study: Flow Assurance, Frac Communication and FDI The first case study focuses on a pair of adjacent Marcellus wells in the Appalachian Basin. The operator wanted toe side flow assurance diagnostics to be sure that the approximately two-mile-long laterals were open to flow during flowback...

...-temperature drilling challenge reliability paper deepwater hp ht well gulf operational procedure case study drilling operation operation circulation exhibition bottomhole assembly Introduction The subject wells presented in this paper were drilled in the Gulf of Mexico (GOM) water depths...

... Abstract A practical framework that outlines the critical steps of a successful process that uses data, machine learning (Ml), and artificial intelligence (AI) is presented in this study. A practical case study is included to demonstrate the process. The use of artificial intelligent...

... benefits that can be observed by adopting the approach in discussion is a shorter study duration. Based on the case study, the study duration was reduced from 10 months to 6.5 months. With shorter duration too, can help the Company in better manage its manpower resources to focus on things that matters...

...’ interest in and familiarity with pursuing various undergraduate STEM disciplines and careers. More specifically, this paper provides an insight into two case studies of novel STEM education programs, developed to enhance a group of high school students’ understanding of petroleum engineering. The programs...

... management cement support tool operation work string casing and cementing firm base mechanical aid petroleum engineer dammam riser corrosion h2s management tayarat formation upstream oil & gas extreme corrosive environment iraq cement plug sulphureous water case study Introduction...

... before the test starts. The case study has been evaluated in two reservoirs, one reservoir which consists of 233 wells that has 6500 well tests and the other reservoir which consists of 90 wells that has 2600 well tests in the last three years’ time period. Wells are distributed across the field...

... perforating case study dhlv valve Introduction Jambaran Tiung Biru (JTB) is a large gas field located onshore Central Java. The field is located 670 km east of Indonesia's capital of Jakarta. The field contains significant gas reserves with expected production of a minimum of 315 MMSCF/day for 16...

... fluid stage length hydraulic fracturing upstream oil & gas operational efficiency proppant zipper-frac pad simul-frac operation fracturing materials multistage fracturing efficiency efficiency gain pad 2 case study pump time simultaneous fracturing operation pad 1 simul-frac...

... installation and operations cleanout friction factor upstream oil & gas enhanced recovery flowline hole survey evaluation execution case study coiled tubing operations surface flowline flow rate injector head friction pressure candidate selection roughness nominal id buildup injection...

... some dilemmas one may encounter when applying the guidelines. Finally, the authors suggest remedies to mitigate limitations and improve the utility of the approach. This case study includes about 300 producing shale wells in the Permian Basin. Referring to Monograph 3, analogous wells were identified...

... for the case study. Lastly, the bottles were observed periodically, and changes were registered photographically. Fluid performance evaluation was based on the following factors: emulsion breaking during the first 15 minutes, defined phase separation, clear aqueous phase, proper cleanliness of the container...

... of the EOR option to be planned, etc. Therefore, this paper is facilitating how we should select an adequate methodology to estimate full-field EOR profiles through comparison of four case studies. Case-1 was picked up as an example of type curve method based on sector models for water alternating gas (WAG...

... simulation gas velocity oil holdup gas injection rate gas lift performance wellbore gas velocity validation inclination dataset fluid dynamics multiphase hydrostatic pressure gradient pressure gradient case study Introduction Next to ESP and beam lift, gas lift remains a dominant...

... ) with magnitude of 80-deg dipping NW. low-frequency amplitude image shows fine laminations in the shaly intervals. Abstract This case study presents a success story of a development well in the Gulf of Mexicodrilled with oil-based mud, with latest high-definition borehole image and comprehensive formation...

... leadership case study cohort talent development workforce mckinsey workflow leadership style oil and gas society of petroleum engineers national oil company millennial total workforce Introduction Several organizations have studied the characteristics of Generation Y and Z, which...

... case study wellbore permian basin long lateral engineering model lateral well hookload trend Introduction While the current Tripping Load Analysis workflow is now used across US land basins, it was initially developed for the Marcellus Basin as a proactive technique to model casing runs...