... reservoirs in all basins. Upstream Oil & Gas drainage tectonic activity hydrostatic equilibrium Reservoir Characterization equilibrium pressure data assumption transition zone saturation interpretation fluid-fill cycle identification rock type permeability variability FWL porosity...

... Upstream Oil & Gas drainage log saturation water level imbibition rock type hydrocarbon saturation hydrocarbon saturation height model FWL saturation primary drainage original free water level transition society of petroleum engineers free water level capillary pressure curve...

... the FWL with the observed water contact (OWC) according to (8) OWC = FWL+ p e Δ ρ g This is an important parameter because the observed contacts can vary from well to well due to the entry-pressure effect while the FWL is typically a parameter shared by all wells or at least...

... distribution interfacial tension fwl capillary pressure imbibition water saturation Introduction Accurate modeling of the initial saturation distribution in a hydrocarbon reservoir is important for the determination of the hydrocarbons in place. This task represents a challenging problem in low...

... reservoir free water level jmod reservoir upstream oil & gas calibration sw profile fwl capillary pressure curve porosity saturation water contact capillary pressure hydrocarbon equation permeability well logging log analysis complex reservoir tight gas integrated approach fluid...

... critical rates, the largest oil rate at which water (or gas) will not be produced. saturation bond number vertical direction capillary fluid interface enhanced recovery fwl capillary pressure permeability reservoir simulation university equation assumption dimensionless group two-phase...

... of the transition zone modelling is brought into focus. reserves evaluation capillary pressure spe 71326 saturation-height function saturation fwl well example leverett pressure curve oil well example water saturation harrison saturation-height method resource in place estimate interfacial...

... into the reservoir, displacing the water. The resulting fluid distribution is governed by the equilibrium between gravitational and capillary forces. In the case of a water-wet reservoir, this distribution is simulated by a drainage capillary pressure curve. The Free water level (FWL) in a reservoir is the level...

... simulation fluid distribution and fluid contact fwl enhanced recovery probe fareed iqbal siddiqui spe 56513 pressure profile static reservoir reservoir characterization assumption pressure migration equilibrium interpretation boundary Introduction When exploring for or developing new...

... capillary pressure curve reservoir rock wettability effect wettability upstream oil & gas filtrate pressure profile formation pressure zone intermediate zone capillary pressure permeability formation testing fwl profile pressure measurement gradient saturation log analysis well logging...

... (FWL) in Kraka was initially inferred from a lateral gradient in the virgin aquifer pressures between three wells. Subsequently, during the process of matching a theoretical saturation curve to the logged water saturations, a tilt of the matrix oil-water contact (OWC) was identified. In order to model...