Abstract
The most common fallacy in the quest for the optimum stimulation treatment in shale plays across the country is to treat them all just like the Barnett Shale. There is no doubt that the Barnett Shale play in the Ft. Worth Basin is the "granddaddy" of shale plays and everyone wants their shale play to be "just like the Barnett Shale." The reality is that shale plays are similar to any other coalbed methane or tight sand play; each reservoir is unique and the stimulation and completion method should be determined based on its individual petrophysical attributes. The journey of selecting the completion style for an emerging shale play begins in the laboratory.
An understanding of the mechanical rock properties and mineralogy is essential to help understand how the shale reservoir should be completed. Actual measurements of absorption-desorption isotherm, kerogen type, and volume are also critical pieces of information needed to find productive shale reservoirs. With this type of data available, significant correlations can be drawn by integrating the wireline log data as a tool to estimate the geochemical analysis. Thus, the wireline log analysis, once calibrated with core measurements, is a very useful tool in extending the reservoir understanding and stimulation design as one moves away from the wellbore where actual lab data was measured. A recent study was conducted to review a laboratory database representing principal shale mineralogy and wireline log data from many of the major shale plays. The results of this study revealed some statistically significant correlations between the wireline log analysis and measured mineralogy, acid solubility, and capillary suction time test results for shale reservoirs. A method was also derived to calculate mechanical rock properties from mineralogy. Understanding mineralogy and fluid sensitivity, especially for shale reservoirs, is essential in optimizing the completion and stimulation treatment for the unique attributes of each shale play. The results of this study have been in petrophysical models driven by wireline logs that are common in the industry to classify the shale by lithofacies, brittleness, and to emulate the lab measurement of acid solubility and capillary suction time test. This is the first step in determining if a particular shale is a viable resource, and which stimulation method will provide a stimulation treatment development and design.
A systematic approach of validating the wireline log calculations with specialized core analysis and a little "tribal" knowledge can help move a play from concept to reality by minimizing the failures and shortening the learning cycle time associated with a commercially successful project.