Abstract
This paper describes a methodology for incorporating uncertainties in the optimization of well count for the deepwater Agbami Field development. The lack of substantial reservoir description data is common in many deepwater discoveries. Therefore, the development plan must be optimized and proven to be robust for a wide range of uncertainties. In the Agbami project, the design of experiments or experimental design (ED) technique was incorporated to optimize the well count across a wide range of subsurface uncertainties.
The lack of substantial reservoir description data is common for many deepwater discoveries. In the Agbami project, the uncertainty in oil in place was significant (greater than a factor of two). This uncertainty was captured in a range of earth (geologic) models. Additional uncertainty variables, including permeability, fault seals, and injection conformance, were studied concurrently. Multiple well count development plans (high, mid, and low) were developed and used as a variable in ED. The ED technique allowed multiple well counts to be quickly tested against multiple geologic models. With the net present value (NPV) calculated for each case, not only was the well count for the overall highest NPV determined, but discrete testing of each geologic model determined the optimum well count for each model. The process allowed testing the robustness of any well count versus any uncertainty (or set of uncertainties).
A method was demonstrated quantifying the difference between perfect and imperfect knowledge of the reservoir description (geologic model) as it pertains to well locations.
