... Abstract Kedung Keris (KK) is a sour oil field based in Cepu Block, Indonesia. KK field was originally planned to have a processing facility with separate pipelines to deliver crude & produced water, while the gas was planned to be flared. To reduce cost, this concept was changed...

... the approach can be employed in field developments to connect well targets to processing facilities. The model determines the optimum location, size and number of offshore well-head platforms, tie-in facilities, well paths and pipeline routes. It incorporates critical technical considerations for the design...

... management complex reservoir well sequence production forecast integration infrastructure lift curve sequence forecast coal seam gas field society of petroleum engineers workflow production rate scale coal seam gas field back pressure cost model processing facility backpressure...

... Abstract A facility blowdown in the oil and gas industry is a safety critical operation; required to ensure the safe shut-down of processing facilities during a plant emergency. In a full facility blowdown operation, the entire plant is isolated into a number of segments and then depressurized...

... Abstract In gas processing facilities, the minimum metal temperatures (MMT) in process equipment and piping are usually observed during highly transient depressurization operations ("blowdown"). The MMT usually sets the material of construction and can have a huge impact on project costs...

... Abstract Developing and producing remote fields in a hilly terrain environment economically and effectively poses a great challenge to oil operators 1 . Transporting hydrocarbon fluids in these fields from the wells to the processing facilities and then to shipping terminals requires...

... & Gas manifold flow rate condensate amplitude Dukler compression Simulation pipeline Taitel production control production logging wavelength mmscfd requirement processing facility conceptual design interface production profile offshore compression Introduction The key aims...

... to recover the estimated 33 MMbbls of oil reserves (together with 284 BCF of condensate rich gas) would require the installation of 10 wellhead platforms and the drilling of 105 development wells, connected to new central oil processing facilities (PLOCPP) and existing central gas/condensate processing...

... by surface multiphase pump. The multiphase pump would boost the pressure from 689.5 kPa (100 psi) to 4826.3 kPa (700 psi), for onward transportation of well fluids to nearby processing facility, which is located 90 km away, by required size pipeline. This system does not require elaborate processing...