1-18 of 18
Keywords: friction factor
Close
Sort by
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference, June 8–9, 2021
Paper Number: SPE-201072-MS
... equipment hydraulic calculation flow rate drillstring design trajectory design friction factor engineer visualization drilling engineering sensitivity analysis sensitivity parameter application data cube total pressure chart well planning fluid density upstream oil & gas calculation...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, August 27–29, 2018
Paper Number: SPE-191019-MS
... potential of lost circulations while cementing. Upstream Oil & Gas drill pipe cement drilling operation polymer rotary steerable system circulation friction factor centralizer drilling torque torque reduction tool spacer system Sirikit Field deep well Well Design string design...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, August 27–29, 2018
Paper Number: SPE-191046-MS
... reason to affect the pressure loss, but the drillpipe's eccentricity variations with RPM and flow rate also had a considerable effect. A higher drillpipe eccentricity provided lower friction factor, in the case single-phase liquid flow. Finally, empirical relations to describe the drillpipe eccentricity...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, August 27–29, 2018
Paper Number: SPE-190989-MS
... Intelligence reservoir objective casing-drilling operation application machine learning Upstream Oil & Gas friction factor BHA ERD well hole cleaning drilling operation platform objective international association of drilling contractors operator setting casing casing-drilling service...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference, August 22–24, 2016
Paper Number: SPE-180685-MS
... and more cost-effective drilling. real time system Upstream Oil & Gas liner drilling operation engineering center provide support planning & scheduling Simulation Artificial Intelligence friction factor simulation system Exhibition adsec engineer training simulator torque replay...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference, August 25–27, 2014
Paper Number: SPE-170469-MS
... hanger OHFF compression contingency release real time system Upstream Oil & Gas friction factor graph long horizontal ELH system ELH History The first ELH was run in June of 2001. In this paper the original type of ELH system and the designs stemming from it are discussed; different...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference, August 25–27, 2014
Paper Number: SPE-170500-MS
... Intelligence Upstream Oil & Gas friction factor drillstring design drilling operation motor bha torque simulation tortuosity society of petroleum engineers well architecture well planning process torque software torque result inclination Introduction There is much literature which...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference, August 25–27, 2014
Paper Number: SPE-170475-MS
... & Gas wellbore stability drilling operation hole section drilling hookload mud weight window North Malay Basin friction factor international association of drilling contractors Drilling wellbore integrity reach performance top quartile hole section hookload mud weight ERD well Malaysia...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, November 1–3, 2010
Paper Number: SPE-135812-MS
... will be reduced dramatically. This effect has been introduced by an angle, which is defined to be proportionality of the hoisting/lowering speed to the tangential speed due to rotation (Aadnoy et. al. 2009). Also Mirhaj et. al. (2010) has analyzed a field case study that back-calculated the friction factor...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, November 1–3, 2010
Paper Number: SPE-136304-MS
... current study against estimated interfacial friction factor Fig. 20 Comparisons between experimental data obtained from current study against estimated friction factor Figure 6 Annular eccentric pipe and captured image Fig. 5 Moving cutting algorithm applied to slug frame...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, August 25–27, 2008
Paper Number: SPE-115206-MS
... to test different fluids, casing grades and varying open hole media. Actual material properties such as friction factors and wear rates have been successfully and accurately measured. It has also been used to identify break-in periods for different hardfacing materials. The methodology has demonstrated...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, August 25–27, 2008
Paper Number: SPE-114943-MS
... the geosteering team requested an inclination change. Upstream Oil & Gas friction factor boundary hook load Directional Drilling trajectory liner drillpipe drilling operation total depth torque international association of drilling contractors drilling system reservoir consequence...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, August 25–27, 2008
Paper Number: SPE-115286-MS
... gives information about ERD design optimization for similar case. drilling operation calculation ERD requirement sensitivity analysis Directional Drilling friction factor lateral section ERD well floatation method Upstream Oil & Gas Drill String Design tie back software...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, September 13–15, 2004
Paper Number: SPE-87973-MS
... hole section length. Drilling data from the early wells provided credible friction factors which when used to model torque and drag in future extended reach wells did not predict any significant increase in risk for extending the open-hole sections. The documented data in the early step-out wells...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology, September 11–13, 2000
Paper Number: SPE-62793-MS
... pressure loss stratified flow fraction pressure drop transition production monitoring friction factor taitel prediction two-phase flow production logging pipe drilling operation theoretical study intermittent flow pressure loss upstream oil & gas Introduction Underbalanced...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology, September 11–13, 2000
Paper Number: SPE-62784-MS
... ecd drilling operation iadc spe 62784 hkld upstream oil & gas torque distribution friction factor baker hughes inteq real-time torque wiper trip drag service weight transfer hole cleaning calculation reiber iadc spe 62784 torque information software spe 62784 real time...
Proceedings Papers

Paper presented at the IADC/SPE Asia Pacific Drilling Technology, September 7–9, 1998
Paper Number: SPE-47804-MS
... are made of steel, various other alloy materials have been introduced for rigid type centralizers, including aluminium and zinc-aluminium alloys. Investigations have shown, however, that steel is a preferred material also for rigid type centralizers. Friction factors under all mud-wetting conditions...
Proceedings Papers

Paper presented at the SPE/IADC Asia Pacific Drilling Technology, September 9–11, 1996
Paper Number: SPE-36382-MS
... and drag analysis, utilizing the known running forces of the centralizers and the friction factors that depend on the mud type. This analysis is important in order to evaluate whether the desired centralizer spacing can be run or rotated without creating problems due to high drag forces, or damage...

Product(s) added to cart

Close Modal