... hydrocarbon reservoirs, the wall thickness that must be added to account for corrosion along the design life can increase riser system loading, hence limits the pipe diameter that can be used for the target water depth. Therefore, and as a viable alternative solution, the application of steel pipes internally...

... coiled tubing operations reference standard detection completion installation and operations wall thickness requirement noise level inspection system reference flaw ct string ct inspection snr inspection specification ct inspection specification specification inspection...

...″ diameter carbon steel pipe with an 8.4mm wall thickness. The wall thickness is relatively thin compared to common inspection scopes. Therefore, the inspection set-up was adapted, and procedural changes were proposed. Consequently, additional validation efforts were required to demonstrate compliance...

... to the groups to decide on maintenance strategy. The conductor wall thickness data measured from automated thickness measurement technique is matching with the measured data from manual thickness measurements. The average wall thickness at each elevation, obtained from the raw automated thickness measurement...

... with bending pipe string were proposed. Critical destabilizing flow rate of the tubing and casing was calculated under different diameter and wall thickness conditions. Analysis of calculation results showed that the current water injection volume of the Wangchang gas storage well was higher than the critical...

... facility Midstream Oil & Gas pipeline wall thickness integrity society of petroleum engineers assessment pipeline corrosion double isolation valve flowline corrosion business continuity requirement safety piping design ensure integrity materials and corrosion Introduction AGP...

... Inhibition Artificial Intelligence riser corrosion well conductor H2S management atmospheric zone inspection Corrosion Management Thickness Pipeline Corrosion Production Chemistry Upstream Oil & Gas Conductor wall thickness assessment mec technique society of petroleum engineers eddy...

... probability including Crude/ gas leakage Well collapse or burst probability Formation fracture by proactive well monitoring materials and corrosion casing and cementing collapse pressure wall thickness mawop value Subsurface Corrosion Upstream Oil & Gas annulus pressure well...

...) calculation as per Norsok D10 standard, application of Double Barrier concept for Secondary Well Barrier Envelope, sensitivity analysis based on MAASP degradation and remained wall thickness of casing and/or liner. This method has already been successfully implemented in several wells during workover...

... service fluid, limit the steel grade to 450 MPa SMYS (X65). Such limitations on steel grade for sour service application results in high wall thickness especially for high pressure pipelines. This necessitates stress relieving requirements and hence leads to an uneconomical scenario for the project...

... ultrasonic transducers delimit a monitored section. The arrays transmit and receive guided ultrasonic waves that insonify the entire pipe section. The received signals are processed by a numerical algorithm to produce a two-dimensional map of wall thickness loss. The algorithm measures wall thickness loss...

... of how the corrosion impacts the well structural integrity was performed in order to establish acceptable, safe limits of corrosion and remaining wall thickness of an integral conductor pipe, which included a simplistic analytical study, detailed structural modeling and 3D finite-element analysis...

... the technical, commercial aspects and extend the remnant life. Detailed study was carried out to verify the various technical aspects and evaluate the methodology, with data collection of existing pipe sizes, pipeline wall thicknesses from pipe condition inspection reports, vehicle loads, vibration...

..., procedures, and process The study conducted experimental tests for two series of CFRP strengthened and rehabilitated pipes under quasi-static large deformation 3-point bending. The main parameters examined in this paper were (a) the corrosion penetration in the wall thickness; (b) its extent along the pipe...

... calculation detailed assessment interaction pipeline field verification activity operator ff assessment feature interaction corrosion feature interaction corroded pipeline materials and corrosion Upstream Oil & Gas wall thickness ili metal loss onshore pipeline corrosion feature midstream...

... evaluation can be performed by utilizing an infield nondestructive evaluation (NDE) device that employs magnetic flux leakage (MFL) to detect flaws and monitor, wall thickness, outer diameter, and various other properties. The real-time device requires no direct contact with pipe, and its compact design...

... chambers, one to monitor any reduction in wall thickness due to wall thinning or rod-wear, and another to detect any corrosion, transverse cuts, cracks, scales etc. The hall effect sensor detects Magnetic Flux Leakages from discontinuities. The unit is remotely operated by the Inspection Engineer from...

... information about ultrasound inspection technologies. Theoretical aspects of EVO Series 1.0 tools are discussed for crack and wall thickness inspections followed by a case study performed in a real pipeline. Furthermore, EVO generation offers capabilities of combining different technologies in one tool. One...

... is difficult to access for instrument maintenance and verification of monitoring data, and many pre-installed systems have proven to be of little use. A technology for non-intrusive wall thickness monitoring based on ultrasonic guided waves has been available for permanent installation topside and subsea...

... installed pile was much higher than the WIP pile. The wall thickness depending on the maximum applied torque and the permissible torsion stress of the steel is also briefly discussed. screw pile resistance shaft diameter pile geometry wing ratio soil stiffness helix diameter diameter uplIft...