... production, a new diffusion equation is modified to describe the shale gas flow, and the simulation results showed a good agreement with the field data. At last, this paper takes an infill well construction in a shale gas reservoir in south China as an example. The hydraulic fractures of parent wells...

... is that the hysteresis effect is negligible in homogenous systems. flow in porous media wag injection relative permeability enhanced recovery fluid dynamics prediction upstream oil & gas simulation result reservoir simulation hysteresis effect experiment estimation hysteresis model carbonate rock...

... improvement reservoir simulation upstream oil & gas reservoir-a depleted oil rim carbonate reservoir drillstem/well testing simulation result oil rim well maximizing recovery oil rim production control reservoir surveillance completion installation and operations drilling operation fluid...

... timely well completion and met the first oil timeline. well logging production monitoring production control reservoir surveillance drillstem testing fluid dynamics modeling & simulation upstream oil & gas information pvt measurement pre-job simulation result log analysis flow...

... of the third stage was measured. The intention of this work is to validate and compare experimental data with CFD simulation results. In addition, flow structures can be visualized through the CFD simulation for oil-water emulsion flows. Density and mass flow rate are measured using the mass flowmeter while...

... surveillance flow metering drillstem/well testing correlation trunkline enhanced recovery information management reservoir simulation flowline simulation result history well performance production logging upstream oil & gas transition karachaganak petroleum pressure loss production...

... results, & finally viewing the machine learning augmented simulation results on the platform. In this solution, the Bayesian Changepoint model is trained on wellhead flowrate & line pressure to identify critical wellpads & pipeline sections needing intervention, in real-time. Deep learning...

... (MTDP) implementation. The five year development plan of this giant offshore field has been successfully assessed based on this optimized approach. The integrated workflow consists of four main parts, including actual field technical rate tracking, DBC optimization, simulation results, and effective...

... contamination in the samples and technology success in the given environments. drilling fluid chemistry flow in porous media drilling fluid formulation drilling fluid selection and formulation drilling fluids and materials Fluid Dynamics simulation result Modeling & Simulation annular pressure...

... difference in the stimulated interval. Optimization of the diverter design and degradation profile is still needed to improve and achieve the best stimulation efficiency. Upstream Oil & Gas simulation result application Modeling & Simulation Efficiency simulator placement Completion...

.... The suggested hysteresis model was evaluated by comparing the simulation results with the available experimental data. The results showed that the developed model is able to simulate oil, water and gas production more accurately. Based on the results, the model can simulate the pressure behaviours observed...

.... Modeling & Simulation Upstream Oil & Gas mitigation measure enhanced recovery waterflooding force balance flow in porous media breakthrough simulation result heterogeneous-2 model five-spot waterflood in-depth conformance control oil-wet pc water breakthrough vertical sweep gas flood...

... capacity; hence, two sector models which represent the Homogeneous and Heterogeneous areas were generated. Based on simulation results, normalized type curves for the hydrocarbon pore volume injected (HCPVI) with incremental recovery factor were generated for each geological area. A production...

... and permeability anisotropy. Results also show that the proposed method greatly improves the accuracy in drawdown mobility estimation, especially in low-permeability formations. Upstream Oil & Gas Simulation simulation result analytical solution flow in porous media PID controller tube pressure...

...Homogeneous Model Simulation Results Synthetic Model Simulation In order to assess the potential of infill wells, synthetic model simulation studies were carried out. The synthetic models have a simple flat structure and geological properties which are populated based on the geological...

... was proposed and applied for actual practice in NB35-2 Oilfield. According to reservoir simulation results, formation pressure distribution could be much more even when thermal fluid was injected into the formation from different wells simultaneously. Besides, the overall developing cost could be greatly...

... in naturally fractured carbonate karst reservoirs. The workflow is based on simulation results of a single-phase transient Brinkman model, which provides the correct and complete description of the coupled flow in vuggy and fractured reservoirs by unifying Stokes flow in vugs and fractures with Darcy flow...

... with an assessment of the potential benefits of CO2 injection in the TZ that opens additional development opportunities in other fields. Upstream Oil & Gas concentration simulation result enhanced recovery water injection HCPV mechanism Oil Recovery asphaltene deposition reservoir saturation...

... transient simulations by considering the effects of penetration rate and variation in cuttings size. Simulation results indicated the formation of a considerably high cuttings bed, particularly in the down-dip intervals (up dip in mud flow direction) at an insufficient pump rate. The height of 1/3 to 1/2...

... Fluid Dynamics enhanced recovery Upstream Oil & Gas flow in porous media two-phase relative permeability simulation result experiment hysteresis effect relative permeability WAG experiment relative permeability curve saturation permeability saturation range History water relative...