...Incorporating Faults Faults can play an important role in determining stress magnitudes and orientations—both in the reservoir and overburden. The assignment of the mechanical properties of the faults, which are often inferred indirectly, is therefore an integral part of building a 3D MEM...

... Abstract This paper presents a data-driven model built using machine learning technique, namely Support-Vector Regression (SVR), for predicting rock mechanical properties (RMP) of tight sands and shale formations based on measured elemental information. This study utilized 324 data points...

... mechanical property interpretation fracture fracture geometry fracture treatment permeability barree technology conference Introduction The concept of fluid induced fracturing can be tracked to the 1930s when it was realized that above certain pressure, injectivity of water, acid and cement...

... and failure (i.e., anisotropic) in the shales and their time-dependent behavior in reacting with drilling fluid. Shale samples were preserved to avoid changes in mechanical properties due to the high clay content and low permeability. Two overburden shale intervals were analyzed to determine strength...

... in the Northern Iraq poses challenges to the cement sheath integrity due to mechanical and thermal stresses induced in the well life. The problem is further aggravated due to narrow window between pore pressure and fracture gradient. The acid-prohibitive cement system with improved mechanical properties...

...Workflow Step 1 – Core-based static elastic anisotropy Empirical predictive relationships between anisotropy and lithology have been documented in Crawford et al. (2020) . The main empirical relationships are illustrated in Figure 2 . The mechanical properties database used in this work...

... by optical microscope images. Higher resolution SEM images show that the maximum infiltration depths of the nanoparticles range from 2 to 5 μm in different crack-free locations. Nanoindentation tests were then conducted under the continuous stiffness measurement (CSM) mode to probe the mechanical properties...

.... cement property upstream oil & gas aliphatic amine cement formulation resin corresponding ed spectrum mechanical property casing and cementing epoxy resins-cement slurry operation application slurry nmr spectrum epoxy resin agent cement slurry society of petroleum engineers cement...

... Petrophysical and Geomechanical studies provide the best means to both 1) evaluate formation properties such as fluid types, volumes and flow potential, and 2) use this information along with rock's mechanical properties to optimize completions program and maximize production. While a basic petrophysical study...

...-wellbore geomechanical modelling with cementing simulations and casing integrity analyses. Specifically, casing eccentricity and cement contamination data are taken from numerical cementing simulations carried out to re-create the conditions in the well. Moreover, formation mechanical properties, pore...

... fracturing production forecast Reservoir Characterization Upstream Oil & Gas mechanical property Cambay Basin reservoir society of petroleum engineers chhatral formation production rate fracture MEM reservoir quality workflow execution fracture geometry permeability geometry key well...

... slowness southern iraq mechanical property waveform dispersion curve anisotropy wellbore society of petroleum engineers stoneley slowness Zubair Formation seg technical program Introduction It is well-known that the majority of the terrestrial material are inherently anisotropic...

... hydraulic fracture vertical growth within the studied Paleozoic tight sands and shale reservoirs units. The approach, which uniquely considered scales of rock geochemical and mechanical properties and data analytics, demostrate the possibility of generating a continuous REP profile using laboratory aquired...

... for downhole applications. Reservoir Characterization heating perforation Efficiency exposure time laser perforation carbonate rock Upstream Oil & Gas mechanical property Laser laser heating society of petroleum engineers interaction Batarseh high power laser permeability Completion...

... for improved waterflood management. Modeling & Simulation fracture dimension hydraulic fracturing depletion enhanced recovery Upstream Oil & Gas injection depth waterflood injection mechanical property crest area fracture pressure Reservoir Characterization waterflooding fracture...

... 1.04 0.42 0.58 0.12 0.04 0.04 0.02 0.02 48.89 Cement Formulations Abstract The mechanical properties are determined to measure the sustainability and long-lasting behavior of cement slurry under wellbore conditions. Different measurement methods were adopted in the past to study...

... in reduction of intervention/remediation costs, along with production maximization. Additionally, the resin mechanical properties were evaluated at different temperatures to assess their response to expected thermal loading, which resulted in competent barriers that can withstand the cyclic loads generated...

... mechanical properties at each depth. The results are consistent with offset well data as well as walk-above VSP velocities obtained in the same well. This technique was applied on a prominent and thick shale formation, which is present throughout UAE. Most of the wells drilled in UAE penetrate through...

... Abstract Rock mechanical properties is essential for several geomechanical applications such as wellbore stability analysis, hydraulic fracturing design, and sand production management. These are often reliably determined from laboratory tests by using cores extracted from wells under simulated...

... of the cement sheath. A methodical approach was applied by first following the standard cementing practices and then categorizing the key factors in overcoming field specific challenges. Stress analysis using advanced software helped to identify the needed mechanical properties for the flexible and expanding...