Skip Nav Destination
1-7 of 7
Keywords: maximum horizontal stressClose
Debashree Paul, Rajnish Shenmar, Rajeev Ranjan Kumar, Joseph Zacharia, Ajit Kumar, Pranav Agarwal, Surej Kumar Subbiah, Atanu Bandyopadhyay, Rahul Talreja, Anindya Nandi, Vibhu Kumar
Paper presented at the Abu Dhabi International Petroleum Exhibition & Conference, November 9–12, 2020
Paper Number: SPE-202802-MS
... & gas log analysis hydraulic fracturing drilling operation perforated interval wellbore integrity drillstem testing coal layer drilling event breakdown pressure stress profile variation maximum horizontal stress stress barrier mem wellbore design wellbore stability analysis mud weight...
Paper presented at the Abu Dhabi International Petroleum Exhibition & Conference, November 11–14, 2019
Paper Number: SPE-197516-MS
... regime wellbore hydraulic fracturing injection period maximum horizontal stress fracture stress condition sensitivity analysis image log Magnitude permeability in-situ stress field society of petroleum engineers As a means to optimize hydraulic fracturing treatments, fracture pressure...
Abdelwahab Noufal, Khalid Obaid, Abdulla Al Blooshi, Mahmoud Basioni, Hani Nehaid, Julian Guerra, Yaxin Liu
Paper presented at the Abu Dhabi International Petroleum Exhibition & Conference, November 12–15, 2018
Paper Number: SPE-193344-MS
... Abstract The stress field is a complex variable that affects all drilling operations, completions and reservoir performance. From the three components of a non-rotated stress field, the maximum horizontal stress is the more difficult variable to model since cannot be directly measured and...
Paper presented at the Abu Dhabi International Petroleum Exhibition & Conference, November 13–16, 2017
Paper Number: SPE-188278-MS
... fracture network model, the fluid flow pathways and fracture vertical connectivity are determined. With borehole breakouts and drilling induced fractures, the identified maximum horizontal stress orientation is in the NNE direction. Our results show that the conductive properties of fault damage zones and...
Paper presented at the Abu Dhabi International Petroleum Exhibition & Conference, November 7–10, 2016
Paper Number: SPE-183204-MS
... Abstract Characterization of magnitudes and directions of principal stresses is vital for building a geomechanical model. The magnitude of the maximum horizontal stress is most challenging to estimate among three principal stresses. Meanwhile a well known Kirsch solution formulated in terms of...
S.. Syofyan, M.. Sirat, R.. Kumar, S. A. Sumaida, A. L. El Gazar, A. A. Salahahuddin, T. A. Al Shabibi, X.. Zhang, A.. Vantala, Y.. Chen, A. A. Mohamad
Paper presented at the Abu Dhabi International Petroleum Exhibition and Conference, November 9–12, 2015
Paper Number: SPE-177657-MS
... based on the correlations with compressional slowness, and the RED profiles of Young's modulus, UCS and friction angle were derived based on the correlations with porosity. Figure 4 Example of the estimated pore pressure, vertical stress, minimum horizontal stress and maximum horizontal stress...
Paper presented at the Abu Dhabi International Petroleum Conference and Exhibition, November 11–14, 2012
Paper Number: SPE-161674-MS
... and 1D results for three wells. For 3D results, vertical stress is green, maximum horizontal stress is blue and minimum horizontal stress is red. Comparison from 1D results is shown in black. Fig. 11 Orientation of the minimum horizontal stress in one layer of the reservoir for the central...
Product(s) added to cartClose Modal