... and companies' financial integrity. The underlying causes of the poor safety culture that resulted in major incidents is due to organisational and safety management failures, inadequate communication, and lack of cultural leadership responsibility. safety risk management upstream oil & gas north...

... their location and estimate their postures; (ii) detect incidents - person falling on the ground, or more dramatically a man-overboard; (iii) detect hazardous situations - person in a restricted area; and (iv) detect PPEs - person wearing helmet, uniform and lifejacket or not. All these events are automatically...

... environment, available open-source algorithms and it has improved the level of efficiency, collaboration and people engagement. artificial intelligence upstream oil & gas natural language ibtikar digital lab application reservoir characterization incident objective information management...

... well start up due to the thermal effect. The decrease of annulus A pressure was then stabilized above the low-level alarm in the annulus A which did not activate the conventional alarm system. Figure 1 Example of Wellbore Annulus Leakage Incident in Subsea Gas Producer Problem Statement...

... Abstract Wells Process Safety (WPS) is a major aspect of delivering a well/ workover safely. An increasing trend in WPS Level 3 incidents was observed in the first four months of 2021. WPS Level 3 incidents are well control events where the first well control barrier was lost leaving one single...

... can enter restricted areas to ensure ongoing compliance and reduced risk of incidents. With dynamic geo-fencing, zone management and evacuations, the Controlled Access Zoning solutions reduces administration and paperwork while increasing safety. Worker Condition Monitoring: Currently, onsite...

... how data and real-time analytics from digitally connected devices using the Industrial Internet of Things (IIOT) can improve organizational productivity, compliance and safety performance including, most crucially, response time to life-threatening incidents. On the ground studies with clients show...

.... Operations of aged faculties in harsh environmental conditions creates challenging operating conditions for any Oil & Gas operator. In the Oil and Gas industry, both onshore and offshore, there are large amounts of hazardous chemicals on drilling or production sites and major incidents resulting in loss...

... learning from incidents (LFI); and to assure and confirm that the process safety risks in projects are identified, documented, and managed to ALAPR. This includes Engineering gaps identified related to existing facilities and wells due to legacy or new critical learnings. Which in turn, assures...

... gharib zeit sand-a case study thickness incident drilling operation drilling fluid management & disposal nanoparticle nano deformable nanoparticle deformable sealing polymer Introduction In a new exploratory field that is located in the central part of the Gulf of Suez. A new...

... Second, most of the companies don’t publish their collision incident as it impacts their reputation. Well collision incidents are rising because of the rapid rise of cluster drilling. Wellbore collisions are most likely to happen at shallow depths, where the most well density exists...

... well control diverter cement slurry scenario drilling fluid management & disposal preparation reservoir characterization conductor overbalance incident active shallow gas field operational safety drilling fluid selection and formulation cement drilling fluid chemistry strength...

.... It will also elaborate on casing cementing and shoe-track drilling operations where MRS were deployed. Referring to the average NPT duration of similar incidents, this initiative has saved 6 to 7 days of operation (eliminating requirement to pull the casing, perform a wiper trip, and re-run back the casing...

... of depleted reservoirs, high hole deviation with high fluid densities creates a unique extreme overbalance scenario, which significantly increases risks of such operations. Several non-productive time (NPT) incidents while carrying out PCL jobs were observed in the project, with main roof causes related...

... to be constantly on bottom, reducing the potential for incidents causing non-productive time (NPT) due to wellbore instability. CwD delivers a superior wellbore by casing off and stabilizing the formation while drilling. Each foot of borehole is drilled and cased off simultaneously eliminating the need...

... A higher number of SIF incidents are seen in the Northern Hemisphere summer months, particularly July and August. This may be a result of extended hours of sunlight that permit longer working hours that could result in fatigue among workers. According to The National Institute for Occupational...

... included cranes, forklifts, flat-bed trucks and prime movers. However, this often led to multiple unnecessary vehicles on site, introducing the risk of congestion on the well site. Adding to that, having non-necessary vehicles previously caused collision incidents. To mitigate said risks, the team...

... Abstract Carryovers are infrequent incidents in process industry. Cause of these events is poorly understood. Carryover cannot be prevented using current configuration of instrumentation and control systems. Prior to the event operators are caught completely off-guard as the process parameters...

... Abstract Oil & Gas operations place a high focus on the prevention of incidents to avoid interruptions to operations, safety of staff and stakeholders, and safeguard their reputation. Incidents and high potential near miss events are investigated mainly to identify the causes triggering...

... hydraulic wireline winches. This was achieved by installing digital load cells on drill floor tuggers. Remote winch operation with load cells effectively mitigates overpull incidents and associated risks, while involving less persons in the red zone. The pilot project brought simple concepts together...