1-20 of 104
Keywords: gas lift
Close
Sort by
Proceedings Papers

Paper presented at the ADIPEC, October 2–5, 2023
Paper Number: SPE-216568-MS
... considered and evaluated thoroughly including extensive study of several artificial lift methods which were thought to defer liquid loading and mitigate kick-off issues such as Foam lifting, Plunger lift, Beam Pump, ESP, Jet Pump and Gas lift (Concentric gas lift). The optimum gas Well de-liquification...
Proceedings Papers

Paper presented at the ADIPEC, October 2–5, 2023
Paper Number: SPE-216366-MS
... control for ESP pump speed and gas lift injection control. Remote control reduces the exposure of personnel to HSE risks and maintain asset integrity with early detection. The main value for the well instrumentation is to save time and allow domain engineers to perform higher analytical function...
Proceedings Papers

Paper presented at the ADIPEC, October 2–5, 2023
Paper Number: SPE-216829-MS
... Abstract Traditional simulation-based approach for Gas-Lift Optimization depends heavily on the quality of reservoir and fluid data. Excessive OPEX and man-hours are needed to maintain data integrity and to ensure the models are suitably calibrated. Even then, pseudo-steady-state models do...
Proceedings Papers

Paper presented at the ADIPEC, October 2–5, 2023
Paper Number: SPE-215996-MS
... being very serious ( Libson and Henry, 1980 ; Settari et a., 1996 ; Lea and Nickens, 2004 ). Plunger gas lift is a good method to address the accumulated water in gas well given its advantages like high lifting efficiency, low production cost, easy operation and no need of other power equipment...
Proceedings Papers

Paper presented at the ADIPEC, October 2–5, 2023
Paper Number: SPE-216010-MS
... reservoir pressure, current voidage or depletion of injection zone (based on volume withdrawn from the zone), crestal location of injector string, existing of downdip benefiters, and gas lift system availability. The screening resulted in two candidates, Well Y-01 and Y-02, where the target zones reservoir...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211480-MS
... applications have also grown considerably. With increasing computing power, numerical and empirical models have gradually become more commonplace to describe reservoir, well, and surface network behaviour ( Sankaran et al., 2009 ). Sub-system optimization applications, such as gas lift optimization, flow...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211575-MS
.... production enhancement hydraulic fracturing upstream oil & gas gas injection downhole intervention co 2 gas lift completion installation and operations enhanced recovery sublimation wellbore liquid enable well kick-off lifting innovative method well intervention gas well deliquification...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211579-MS
... Prosper models were built and used to simulate the following: Reservoir T model to simulate the required optimal gas lift rate. Different sensitivities are performed for injection gas rates (0.5 – 1 – 1.5 – 2 – 2.5 – 3 – 3.5 MMscf/d) to estimate the gas requirement from C for gas lift...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211042-MS
... Abstract Optimizing a gas lift well can be challenging. Essentially, it needs to optimize a complex system, where gas is compressed and injected to the bottom of the well to lift oil/water/gas to the surface. It contains numerous facilities and equipment, from compressor, injection valves...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211028-MS
... on the same approach as Ref 1 . The model that is built is an integrated model of an Oil Shale network. The following sections describe the modelling approach. Thermodynamic Model Abstract Optimization of gas lift rates in an oil field with hundreds of wells is a complex challenge. Typically...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211080-MS
... oil & gas artificial intelligence artificial lift system composition viscosity fraction gas lift prediction psat abu dhabi int database exhib abu dhabi national oil company algorithm result pet petroleum engineer workflow comparison mole fraction Introduction This paper...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211050-MS
... production. Input fluid is pumped into the line to initiate or improve production from the well. The constraints of the system and equipment largely determine the type of artificial lift that can be used. Continuous flow gas lift is one option, and it involves injecting high-pressure lift gas metered...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211103-MS
... measurements. This has resulted in much improved allocation factors for oil, gas, and water. Fit-for-purpose algorithms have been developed to perform well test validation for different well types based on raw data at line conditions. gas lift upstream oil & gas complex reservoir equation of state...
Proceedings Papers

Paper presented at the ADIPEC, October 31–November 3, 2022
Paper Number: SPE-211138-MS
... The first field trial was conducted considering flaring 0.3 MMscfd for three weeks and increasing the nitrogen purity from 97 % to 99.8 %. Traces of Sulphur deposition was experienced in the gas lift system especially downstream of choke valves where low temperatures are expected and elemental...

Product(s) added to cart

Close Modal