... -of evaluation- an accumulated contribution of crude oil of 5,500 barrels in addition to the initial production, representing gross income of USD $388,000.00 with a net profit of USD $68,000.00 and investment recovery time of 47 days. These results demonstrate that the methodology is technically and economically...

... management corrosion inhibition operation cost reduction strategy production chemistry workplace hazard stripper crude oil ptb alg hydrogen sulfide requirement oil production oilfield chemistry concentration peak flowrate specification salt level removing desalter General information...

... reservoir condition water saturation oil permeability effective oil permeability brine core sample effective permeability crude oil n-rpm polymer free relative permeability modifier Introduction Then the below steps are followed. The N-RPM incorporates the high contribution...

... inlet separator chemical injection cpp liquid tanker aspen-hysy wax inhibition scale remediation flow assurance paraffin remediation pipeline condensate crude oil precipitation retention time separation efficiency study production profile Introduction The DARA area, located...

... their limitations and inherent accuracy in flow measurement. A 10 % deduction on oil production was applied for fiscal allocation between the companies. To enhance fiscal measurement accuracy, new facilities for measurement of single-phase partially stabilized crude oil were recently implemented. The facilities...

... and materials heavy oil play geologist waterflooding petroleum play type nanocarbon water flooding interfacial tension water cut amphiphilic nanocarbon amphiphilic carbon nanoparticle concentration crude oil chemical flooding methods emulsion viscosity rock surface displacement efficiency...

... blended in the in-house formulated surfactant named IVF respectively at a particular ratio. The test was performed with and without the presence of reservoir crude oil. Results showed that formulation with nanoparticles enhanced foam stability by having longer foam half-life than the IVF surfactant alone...

... inhibition remediation of hydrates paraffin remediation hydrate remediation hydrate inhibition upstream oil & gas gas reservoir porosity proppant wellbore control effect wax inhibitor wellhead temperature dosage condensate gas crude oil fracture kuqa ultra deep high pressure control...

... & gas brine dpdc cold finger paraffin chemistry chemistry paraffin deposition crude oil limitation para-window effectiveness fouling factor crystal modifier temperature gradient surface temperature test cell Introduction: Paraffin or wax deposition is a common challenge in oil...

... of hydrocarbons decontamination. land reclamation bioremediation consortium remediation fungal strain experiment hydrocarbon mixture upstream oil & gas incubation aromatic hydrocarbon crude oil consortia hydrocarbon fungus bacterial strain isolation autochtonous bacteria-fungi consortia...

... flooding methods gas injection method alternate injection flow in porous media crude oil fluid dynamics chang 64 water management waterflooding formation energy haobasi oilfield enhanced recovery upstream oil & gas nitrogen injection water injection recovery rate pressure gradient...

... Abstract Desalting of Crude oil is a critical unit operation as improper De-salter design can leads to significant corrosion in downstream facilities and longer shutdown. Design of De-salter is mainly influenced by physical properties/emulsion tendency of crude oil, salt specification...

... of valuable components to the gas phase, thereby maximizing liquid recovery. Ideal Liquid Recovery is defined as the theoretical maximum liquid recovery possible by successively separating the lightest components from the well-fluid until the crude oil specifications are met, i.e. separating all the Methane...

... formation with surface clustered operation in Onshore and Offshore Artificial Islands. It also describes HSE challenges that have been faced in safe handling of return fluid, management of volatile recovered crude oil, simultaneous operations (SIMOPS) with Drilling Rig, Project and Construction (P&C...

... in aromatic solvents and have high temperature stability. These products are applied as formulations in hydrocarbon solvent for asphaltene dispersant testing. Reference Asphaltene Dispersant Chemistry Performance tests conducted are in comparison with a blank untreated crude oil and industry standard...

... characteristic. By mixing solvents and precipitants with crude oil, we have confirmed that the asphaltene peak measures same value whether the asphaltene is in, or out, of solution which is precisely the feature that allows surface data to be representative of the cumulative precipitation downhole. The main...

... of crude oil from carbonate surfaces were investigated by using a liberation cell at both ambient and elevated temperatures (70°C). The liberation cell is equipped with an optical microscope for monitoring oil liberation. In addition, a custom-designed integrated thin film drainage apparatus (ITFDA...

... of a standalone 0.5% AOS solution was 7 minutes. In presence of crude oil, the foam half-life decreased for all the tested systems. Coreflood experiments at 150°F showed a significant increase in the mobility reduction factor when the new AOS-MWCNT system was used as the foamer instead of standalone AOS or AOS...

... water reservoir foam society of petroleum engineers gas injection method phase behavior crude oil mobility control enhanced oil recovery Introduction Foam has been extensively studied as an effective method for mobility control and gas shut-off for many decades ( Farzaneh & Sohrabi...

... coalescence and therefore separation from the emulsion [Boyson, 2007]. Abstract Crude oil dehydration is one of the first, most important and challenging steps in oil production and processing. To achieve rapid and energy-optimized demulsification of water-in-oil emulsions, Saudi Aramco and TechnipFMC...