... procedure axial load assessment structural integrity Introduction In offshore wells, the outermost well casing – the conductor, protects the surface casing from the aggressive marine environment throughout its life and may have a significant corrosion of conductor pipes (see example on Figure 1...

... the compressive axial loads in the crossing. It is shown that for the short crossing spans, which are typical in the shallow water of the gulf region, the onset of any VIV will result in phenomenon which is called here "crosswalking". This crosswalking will result in a lateral displacement of the pipeline over...

... and Installing Surface Tree. The top of cement (TOC) are often unknown for downhole locations without any specialized inspection activities. For this reason, a range of scenarios can be developed and evaluated to obtain the conductor and casing axial loads which results at the end of the well completion...

... leak criteria was performed (gas test without axial load). Phase 1 ISO 14310-V3 The WAB was expanded at 50°C in multiple stages in order to simulate the well conditions. Initially the WAB was subjected to 138 bar (2000 psi). Then; the expansion was subsequently resumed while increasing to 345...

... Table 5 Axial Load Distribution and other output parameters (Design Option 1) Boundary Compressive Loads Critical Buckling Loads BHA Section number Right-hand (F 2 ), lbf Left-hand (F 1 ), lbf Sinusoidal Helical Minimum Yield Load, lbf Percentage of Yield Load, % Torque...