Acidizing and acid fracturing techniques are routinely used in two important formations in the marine regions of Mexico, the Jurassic and Cretaceous formations. These formations are naturally fractured carbonate and dolomite reservoirs having a permeability in the range of 0.19 to 22 mD, porosity from 2.8 to 6%, approximate bottomhole temperature (BHT) up to 177°C, pressure (BHP) of 10,374 psi, and a crude of 45° API. Using acid fracturing techniques helps improve the development of these assets. This paper shows the results of more than 40 acid fracturing operations performed in recent years.

Depending on the productivity evaluation, wells belonging to these assets are stimulated as part of the completion stage. Because of their low permeability, a common approach is to perform an acid fracturing operation. As a first evaluation, a minifrac test is executed to obtain the necessary data to calibrate the acid fracturing simulation model. After this step is performed, the acid fracturing design is evaluated. Generally, a sustained production acidizing technique is used for conductivity enhancement and closed-fracture acidizing is also included as a tailored treatment with an all seawater-based acidizing system.

For these operations, an average five-fold increase in oil production has been observed after treatment. In some cases wells in the completion stage, having no production before treatment, delivered up to 7000 BOPD after treatment. In these low-permeability assets, the post-fracturing response shows good results in general terms, increasing final conductivity in the near-wellbore area, and improving the production in these wells. The fracture gradient observed varies from 0.715 to 0.981 psi/ft with an average minimum stress of 13,670 psi. To perform the acid fracturing treatments, an average of 6400 hydraulic horsepower (HHP) must be available, with up to 13,400-psi surface pressure observed. As such, a stimulation vessel is necessary in all operations, applying a 26-bbl/min average pumping rate.

Globally, acid fracturing treatments are a common stimulation technique. This study shows that stimulating proper candidates in Mexico using acid fracturing significantly helps increase production, which may be relevant for the exploitation of new areas where fracturing has not been implemented.

You can access this article if you purchase or spend a download.