..., and the amount of emulsion and sludge formed under various conditions. We further consider the impacts of acid concentration [hydrochloric acid (HCl)], ferric ions, and various acidizing additives [i.e., corrosion inhibitor (ACI), corrosion inhibitor intensifier (ACII), iron chelating agent (IC-3), iron...

... comprehension of AWJ slotting, including slot evolution, slotting mechanism, and parameter influence. For this study, we conducted experiments of AWJ rock slotting by reciprocating nozzle to investigate the effects of rock type, jet time, jet rate, abrasive volume concentration, jet distance, nozzle...

... permeability cov co 2 miscible density-driven convection concentration sand box permeability cov-l 0 permeability heterogeneity convective dissolution Impact of permeability heterogeneity on density-driven convection in porous media Miscible density-driven convection is crucial in GCS 3D...

... alkalinity digital image colorimetry analyte concentration precipitate laboratory image processing production unit wax inhibition concentration dibam reaction analyte reaction medium Oil production on offshore platforms involves a series of operational challenges, mainly due...

... of microfractures and micropores. Graphene-based products are capable of plugging microfractures in low concentration due to their excellent micronanometer size and lamellar membrane structure. In this study, we develop a liquid-phase shear stripping methodology with relatively acceptable cost to produce graphene...

... glass micromodels with homogeneous and heterogeneous patterns to comprehensively and visually investigate the salt precipitation during CO 2 injection in carbon capture and storage (CCS) and EOR processes. In addition, we ivestigated virtually the impact of porous media type, brine concentration, CO 2...

... geology sedimentary rock fracturing fluid geologist proppant reservoir geomechanics hydraulic fracturing fracturing materials clastic rock rock type geological subdiscipline concentration fracture closure coefficient slurry conductivity fracture conductivity viscosity normalized proppant...

... performance of CNF/BT-WBDFs under extreme conditions. Experimental results revealed that terpolymer AAD demonstrated the best salt and thermal resistance under conditions of 26 wt% NaCl concentration and aging at 200°C for 16 hours. Further optimization of the monomer ratio for AAD showed that when the AM...

... the gas storage and transportation behaviors within the reservoir. Understanding these structural evolutions and their corresponding control mechanisms is crucial. This work determined the optimal acid concentration through acidification experiments and characterized the structural evolution laws...

... increases from 38.80 g/100 g to 58.26 g/100 g, while the oil swelling factor rises from 1.19 to 1.71. Microscope analysis further reveals that DME increases the local concentration of CO 2 molecules around the oil phase, thereby enhancing CO 2 dissolution. In addition, DME reduces the free energy barrier...

... be of high relevance when projecting HPAM injectivity, fracture initiation, and whether viscoelasticity is significant in oil recovery of capillary-trapped residual oil with or without the presence of fractures. The literature review summarizes the effects of polymer concentration, molecular weight (Mw...

... capacity modeling & simulation effect production monitoring experiment injection flowback water imbibition capacity saturation rock type reservoir surveillance salinity diffusion equilibrium concentration competitive adsorption capacity hydraulic fracturing enhanced recovery sample 2...

... tests. Furthermore, during the dynamic evaluation under reservoir conditions, a significant increase in recovered oil of 20% was observed at a concentration of the bio-nanofluid dispersed in the gas stream of 1.5 bbl‧MMscf −1 . According to the capillary blocking test, no restrictions were generated...

... and the oleic phases, a property known as the partitioning coefficient ( K ) , which defines the ratio of concentration at the equilibrium state in water and oil in the reservoir. The correct selection of the tracer and its K depends primarily on the injected concentration, temperature, and volume...

..., characterized by abundant geothermal resources, has made it an ideal location for harnessing geothermal energy. These resources have been effectively utilized to develop a robust geothermal industry, positioning Turkey as a leading player in renewable energy. This concentration of geothermal plants in western...

... subsurface storage oilfield chemistry artificial intelligence enhanced recovery climate change concentration asphaltene remediation hydrate inhibition modeling & simulation geochemistry geological subdiscipline silicate reaction mineral production chemistry hydrate remediation co 2 wax...

... flow in porous media hydrate remediation production monitoring production control co 2 flow assurance geological subdiscipline depositional environment hydrate formation sedimentary geology artificial intelligence wax remediation concentration enhanced recovery stability chemical...

..., hydraulic fracturing fluid (HFF) injection usually starts with a concentrated acid spearhead for rapid rock dissolution, followed by the injection of near-neutral pH slickwater containing chemicals and proppants. A multistep sequential injection approach was used to investigate different stages of rock...

...-filled view cell is measured using infrared light spectroscopy. Diffusion through 100% water-saturated rock was measured using the pressure decay method. In this experiment, the partial pressure of the gas diffusing into saturated rock was measured and converted to concentration change. 3D numerical...

... halide geology membrane asset and portfolio management brine halite geologist mineral economic analysis guidelines extraction sustainability social responsibility concentration department lithium bakken formation co 3 recovery method sustainable development recovery nanolisal model...