Summary
The effects of chemical additives on mitigating water blocking and improving oil recovery were experimentally examined for gas-water and oil-water systems in spontaneous imbibition cells. In these attempts, two factors are critically important: (1) understanding the physics of the interaction, whether it is co- or countercurrent, and (2) characteristics of the chemical additives to suitably orient the interaction for specific purposes (accelerate/decelerate matrix-fracture interactions). Co- and countercurrent imbibition experiments were conducted on sandstone rock samples using various oil samples (viscosities between 1.37 cp and 54.61 cp) as well as gas (air). The selected new-generation chemical additives included deep eutectic solvents, cationic/anionic/nonionic surfactants, and inorganic and organic alkalis. We observed that the functionality of the chemicals varied depending on the fluid type, interaction type (co- or countercurrent), and application purposes. For instance, chemicals such as the cationic surfactant cetyltrimethylammonium bromide (CTAB) significantly reduced water invasion into the gas-saturated sandstone cores during fracturing, while chemicals such as the nonionic surfactant Tween® 80 provided considerable oil recovery improvement in the oil-saturated sandstone cores. The surface tension and wettability of the rock surface are crucial factors in determining the suitability of chemicals for mitigating water blockage. In terms of oil recovery, certain chemical additives, such as O342 and Tween 80, may result in a lower recovery rate in the early stage because of their strong ability in interfacial tension (IFT) reduction but could lead to a higher ultimate recovery factor by altering the wettability. Additionally, the introduction of chemicals resulted in notable spontaneous emulsification, especially in countercurrent imbibition, thereby enhancing oil recovery. The spontaneous emulsification and its stability are influenced by factors such as oil drop size, boundary condition, interaction type, IFT, wettability, as well as rock surface charges. The results have implications for understanding the physics and dynamics of matrix-fracture interactions in co- and countercurrent conditions. In addition, they serve as the first step toward selecting appropriate chemical additives in hydraulic fracturing fluid design and enhancing oil recovery in unconventional reservoirs.