... process and to gain insight into the reservoir response to temperature and pore pressure changes. The numerical simulation is carried out using a self-developed coupled finite element model which incorporates our proposed strain-induced permeability model. The obtained simulation results were compared...

... years under natural depletion followed by 20 years steamflooding or 20 years TINBOP (with the same amount of steam injected). Simulation results indicate TINBOP cyclic steam injection enhances oil recovery to 76% OOIP compared to that with conventional steamflooding, 69% OOIP. The workover cost...

... using reservoir model simulation results. The computational domains and types of the boundary conditions used are illustrated by Fig.3. Data from 2D SAGD cross section simulations were assumed applicable for formulation of the boundary conditions for the 3D producer inflow simulation because...

... for motor 1 and 2 are 370 and 287 psi respectively. Figures 3 and 4 show the simulation results for mud flow rates of 450 and 300 gpm. The highest values of the average ROP for motor 1 is 18.5 ft/hr and 15.4 ft/hr in comparison to motor 2 average ROP values of 15.4 ft/hr and 9.8 ft/hr respectively for mud...

.... saturation point oil mixture liquid-liquid split gas oil ratio injection gas carbon number saturation pressure experiment simulation result liquid phase composition equation upstream oil & gas simulated saturation pressure pvt measurement coefficient phase envelope characterization...

... injector vertical injector simulation result flooding process production curve 1 PAPER 2006-123 Economic Analysis for Enhanced CO2 Injection and Sequestration Using Horizontal Wells P. GUI, X. JIA, J.C. CUNHA, L.B. CUNHA University of Alberta This paper is to be presented at the Petroleum Society s...

... screened under various operating conditions to characterize the optimal applicable reservoir and operating conditions for the Fast-SAGD process. Economic analysis was then used for optimizing the Fast-SAGD operating conditions. The simulation results indicate improved energy efficiency and productivity...

... reservoir flowrate modeling & simulation matrix permeability fracture mean fracture aperture simulation result fluid dynamics fractured core simulation model parallel plate model flow in porous media hydraulic fracturing injection rate pressure drop fracture aperture fracture...

... & simulation economic analysis optimum well simulation result oil rim field development optimization and planning permeability cumulative oil production asset and portfolio management economics oil recovery forecast upstream oil & gas reservoir permeability PAPER 2003-014 Investigation...

... was based on actual relative permeability curves measured for Hamaca. However, these curves were adjusted to obtain a satisfactory history match with the experimental results. Simulation Results The production performance and the effects of propane-steam mass ratio are examined by plotting various...

... cum oil oil field gas-oil ratio oil bubble point pressure modeling & simulation injection pressure bubble point pressure characterization black oil model kpa equation pvt measurement simulation result procedure reservoir simulation kr curve flow in porous media fluid...

.... Exponential, hyperbolic, and harmonic decline analyses were performed on the simulation results at both 25% and 50% HCPV injected to validate the accuracy of the predictions. Figure 9 and Figure 10 display the declines conducted at 50% HCPVI (at 20% OOIP RF). January 2007 January 2011 was taken...

... experiments and numerical simulation results provided quite good agreement when the constraining cell walls were not preferentially wetted by the liquid. When the walls were wetted by the liquid the simulations provided severe underestimates of the experimental capillary flow results, apparently due...

... product thickness contaminant upstream oil & gas machine learning us government remediation process equation recovery well remediation multiphase flow model gradient artificial intelligence saturation land reclamation elevation simulation result free product thickness...

... oil rate liquid drop equation of state upstream oil & gas composition condensate amount kpa characterization procedure simulation result reservoir model modeling & simulation eos model fc model fluid modeling total oil reservoir 1 fraction gas-oil ratio pvt measurement...