...) is considered, proposing to inject CO 2 separated on the platform back into the original gas reservoir. The CO 2 storage site considered is a nearly abandoned gas block in the DF1-1 gas field. Membrane separation technique will be installed on the platform for the separation. CO 2 is compressed...

... by other investigators for live oil from other reservoirs. Good agreements are observed which confirm the suitability of the models. Introduction Crude oil is considered as a colloidal mixture consisting fractions of saturated hydrocarbons, aromatics, resins and asphaltenes components 1. Asphaltene...

... scenario 2 test duration fracture treatment hydraulic fracturing recorder pressure transient analysis co 2 drillstem testing diagnostic analysis stimulation permeability drillstem/well testing sequence reservoir upstream oil & gas scenario 1 buildup injection cleanup...

... ultra-viscous bitumen from the Athabasca oil-sands in the Province of Alberta, Canada. In the Hangingstone area, 15 pairs of SAGD wells had been drilled by 2006 in the reservoir of maximum 30 m thickness and about 300 m depth. The production reached an average of 8,000 BOPD in recent years...

... strength data, acid solubility, fracture fluid selection and mineral identification of a fractured tight gas carbonate reservoir. Basic to a successful acid fracture design are acid etching and rotating disc tests which show for a given acid system, conductivity at a given stress (etched width or how much...

... reservoir, is presented. The genetic algorithm produced an operable process, which could be described as a new combination of pre-existing concepts. The process offers material improvements in thermal bitumen supply costs, as well as recovery factor. Major reductions in the physical steam/oil ratio (SOR...

... for the Proceedings of the Canadian International Petroleum Conference (CIPC) 2009, Calgary, Alberta, Canada, 16 18 June 2009. This paper will be considered for publication in Petroleum Society journals. Publication rights are reserved. This is a pre print and subject to correction. Abstract Results of a reservoir...

... on factual observations of naturally fractured reservoirs in several countries is presented for estimating distribution of hydrocarbon cumulative production in wells drilled in fractured reservoirs of types A, B or C. These observations indicate that in reservoirs of type C most of the cumulative production...

... the recovery of heavy oil reserves, such as those of Western Canada, has not been given enough attention due to immiscible nature of the mixture of CO 2 and these heavy oil resources. Many heavy oil reservoirs in Western Canada have been under waterflooding where oil is produced at very high water-oilratios...

... will be considered for publication in Petroleum Society journals. Publication rights are reserved. This is a pre print and subject to correction. Abstract Material balance has long been used in reservoir engineering practice as a simple yet powerful tool to determine the Original-Gas-In-Place (G). The conventional...

... pressure drop alkaline flooding alkaline solution sandpack emulsification experimentally alkaline flooding test alkaline concentration flow in porous media enhanced recovery reservoir waterflooding upstream oil & gas permeability fluid dynamics oil recovery emulsion heavy...

... in Petroleum Society journals. Publication rights are reserved. This is a pre-print and subject to correction. 1 Abstract The Montney gas reservoir has become a critically important component of current western Canadian gas supply and offers exciting future potential. However, this reservoir often presents...

... dimensionless pressure fracture fractured reservoir permeability linear model radial reservoir log-log plot boundary porosity model constant rate drillstem/well testing reservoir slab matrix region 4 upstream oil & gas equation time plot field data linear reservoir matrix...

...) method, has been extensively studied, both theoretically and experimentally, in conventional sandstone models. However, the applicability of this process on naturally fractured reservoirs has not been addressed yet. The objective of the present work is to evaluate the effect of fractures geometrical...

... saturation producer production history general decline trend variation perturbation injection water injection clear decline trend reservoir fluctuation oil rate enhanced recovery water flood production rate injection rate injector cumulative oil upstream oil & gas...

... decomposition hydrate pressure production thermal conductivity gas production flow assurance hydrate cap equation production monitoring analytical model hydrate-capped gas reservoir thickness upstream oil & gas bottomhole pressure recovery hydrate recovery permeability...

...1 PAPER 2009-150 In-Situ Combustion in the Oil Reservoirs Underlain by Bottom Water. Review of the Field and Laboratory Tests A.T. Turta, R. Coates Alberta Research Council (ARC) M. Greaves University of Bath This paper is accepted for the Proceedings of the Canadian International Petroleum...

... formation parameters for a reservoir engineering to make decisions correctly and timely. Introduction Dynamic monitoring technology of oil and gas reservoir can provide reliable formation parameters, and is an effective way to improve efficiency of reservoir management. The system transfers the data...

... reservoir formation brine injection emulsion surfactant sandpack chemical injection enhanced recovery waterflooding upstream oil & gas heavy oil chemical flooding methods fluid dynamics chemical slug size modeling & simulation flow in porous media permeability flood test...

...1 PAPER 2009-176 Parameter Evaluation of CO2 Sequestration Capacity in Depleted Oil Reservoirs Coreflood Tests and Numerical Simulation S. WANG, M. DONG University of Calgary Z. LI* University of Regina *now with Husky Energy Inc. This paper is accepted for the Proceedings of the Canadian...