... performance, such as gas-oil ratio (GOR). It is therefore important, from the outset of aproject, to check the consistency of available PVT data with the productiontest data and with the geological description before using it in a reservoirsimulation study. EOS models are used by engineers to identify...

... Abstract Virtually all of the published correlations for solution gasoil ratios for pressures at and below bubble-point pressures suffer from two major deficiencies. First, calculated values of solution gas-oil ratios do not match the concave up - point of inflection - concave down shapes...

... and volumetric sweep for horizontal miscible floods in either strongly gravity dominated system, heterogeneous systems or viscous fingering dominated systems. Miscible flood simulation studies and results from actual field projects show that a plot of gas-oil ratio (GOR) correlates well with cumulative...

... region, the high mobility of the solvent causes its production to increase while oil production decreases. Figure 1 shows the typical behavior for a well in a maturingvertical flood. Between the months of July 1995 and April 1995, the gas-oil ratio for this well increased from 180 sm 3 /m 3 to 325 sm 3...

... Abstract This paper will briefly discuss the laboratory measurements of PVT data. Each of the five PVT test performed on oil will be identified and the corresponding report formats explained. The two most commonly used data, formation volume factor and solution gas-oil ratio are generally...