... survey sampling and testing tasks at a relatively large number of sites per dive. The ROV platform enables the use of precision measurement devices such as high-resolution sonar, cone penetrometer test (CPT) systems and core drilling machines to take in-situ samples and measurements. An ROV mounted skid...

... as a special end effector to be handled through a WROV manipulator and requires a dedicated skid to be connected beneath a WROV of convenience for Power & Control. The tool is currently configured for pipes with an OD of approx. 450 mm but can also be applied to different sizes, with minor adjustments...

... blocks. The standard Aker un-manned hull (Blind Faith) and a flat top deck with wet truss (Njord A) were combined to form the basis for the topside design using skid-based low weight modules with standardized equipment. A process on removing "nice to have" and heritage from other projects gave a strict...

.... The objective of this project was to develop the technology necessary to remove marine growth from offshore structures using an ROV-operated system employing controlled cavitation erosion without damaging the anti-fouling coating. An ROV-mounted skid fitted a custom cavitation nozzle has been developed...

... Abstract This paper provides a general overview of the subsea Electric Submersible Pump ESP skid boosting system, and describes the technologies introduced to make the ESP system more robust, the resources brought together to move the required assembly tasks to a controlled onshore facility...

... will reduce the time between final funding and platform installation. The Delta House FPS is based on a single deck design in which most process and utility skids were placed on the main (upper) level. One of the main design objectives was to be able to lift the completed topsides deck with Kiewit's Heavy...

... transport in a single riser or flowline. Since reservoir and well fluid characteristics alter over their life cycle, it is essential that MPFM be recalibrated to account for this to ensure their continued accuracy. Subsea 7 has developed and operated an ROV deployed Remote Hydrocarbon Sampling Skid capable...

... for seafloor ESP is to install it inside a dummy well, a solution applied in the Jubarte and Golfinho fields1. Another alternative developed by Petrobras is the so called ESP on the Skid. The objective has been to conceive a system with an ESP that can be installed on the seabed which has been designed in two...

..., they open a ‘fast-track’ way of opening the energy market to natural gas, thus increasing diversity of supply, reducing costs and introducing environmental benefits. suction drum midstream oil & gas re-gasification skid propane liquid seawater temperature skid 1 re-gasification vessel re...

... interface separation and treating bi-phase rst otc 15357 separator turbine liquid application control valve reaction jet upstream oil & gas platform inlet nozzle offshore technology conference mars operation skid OTC 15357 RST s Mission to Mars The First Commercial...

... which self-corrects its own depth to follow the skid settings (long-beam plow principle), a V-shaped share and trench (typically about 35 degrees to the horizontal for stability in sand) with a shorter foreshare ahead of the main share, a weight on the order of 120t and a tow force capacity of about...

... mackinnon otc 11044 deepwater intervention rov system connection system operation tooling intervention equipment service skid upstream oil & gas requirement flange connector clamp guideline subsea system cassette bay skid otc 11044 interface specification Copyright 1999, Offshore...

... layout of the Manifold system, 6' and 2' hard pipe spool pieces, three well locations, two 6' flowline skids, 2' service line skid, four 2' methanol pipe lines, and the E/H umbilical. support foundation assembly skid moonpool subsea cluster manifold system design seastar controls...

... the SHASTA production, several modifications were required. These included the addition of a J- tube for the SHASTA risers, a new I tube for the SHASTA umbilical, a subeellsr deek extension for the two !lowlinc Shut Down Valves (SDVS), launcher and reeeiver skid, dual line heater with automat ic chokes, two...

...-on-bit and bottom hole temperature are sent to the sur- face via a single conductor wire. Surface Equipment Development. Several components of surface equipment were developed for the drilling project. These included: Surface control skid to control the hydraulic and electric power in the umbilical...

... ABSTRACT The requirement to drill, work over, recomplete, deepen, redrill or abandon wells on multi-well production platforms has increased and is increasing in the Gulf of Mexico. The conventional solution to do the latter has been to obtain a cantilever jackup, a jackup with a skid off...

... utilized multiple consultants and fabrication contractors to design and construct numerous modules and skids for subsequent integration into the TLP deck structure (see schedule overview - Figure 1). The project team developed design and construction strategies, consultant and contractor selection...

... interfaces on ball valves in a subsea pipeline system in the Gulf of Mexico. The pipelines connected the Jolliet TLWP (Tension Leg Wellhead Platform) in 1760 feet of water in the Gulf of Mexico back to more conventional facilities in 616 feet of water. The Unified Connection Skid housing most of the valves...

... panels Manual valve override/actuation tool Manual valve interface panels Hydraulic power skid Dredging/jetting skid oseberg rov tooling manipulator skid underwater testing isolation valve operation upstream oil & gas actuation hydraulic power skid interface panel rov...

... to accomplish these tasks the following remote work system work packages were developed : – Hydraulic override tool – Mechanical override / actuation tool – Jetting / dredging skid Special interface panels for the Christmas trees and PGB were also developed to allow effective, remote work system...