... sedimentary rock geology recovery perforation procedure rao process producer constraint sw-gagd payzone oil recovery gas-assisted gravity drainage simulation immiscible co 2 Introduction The gas-assisted gravity drainage (GAGD) process has been extensively employed for improved...

... the platform's production potential. injection miscible method gor floating production systems geologist enhanced recovery platform initial uncertainty producer offshore technology conference flexibility conversion configuration geology subsea system wag cycling reservoir field...

... Abstract This paper presents an integrated multi-disciplinary approach to optimize the value of water, that is, barrels of water injected per barrel of oil produced. Value of water (VoW) is optimized through focusing on the following critical components of a successful injector: Optimum...

... the properties of the produced fluids, which may comprise mixtures of gas/oil/water. Basic fluid properties and static information including wellbore design are required for the initial model setup. The dynamic input comprises choke downstream pressure, choke valve setting, pressure and temperature at wellhead...

... of the technique are a significant increase in NPV, and a strong cash flow on the beginning of reservoir production life. reservoir characterization optimization problem asset and portfolio management artificial intelligence waterflooding injector producer upstream oil & gas time step reservoir...

... Abstract The Energy Transition is redefining how energy is produced, consumed, and viewed. Many consumers today are requiring a more sustainable method of energy generation as a means of combatting climate change, and nations have pledged to take steps to control climate emissions. Newly...

... include hydraulic fractures and reactivated natural fractures, are divided into backbone, dead-end, and isolated fractures. Different well patterns that aim to maximize the connectivity of the injector to the producer (maximize the area of the backbone fractures) are simulated. A sensitivity analysis...

... can potentially be utilized for annual field forecasting for work program and budget cycle. asset and portfolio management sand production producer digital field sand management solution drillstem/well testing erosion rate unplanned deferment upstream oil & gas information drillstem...

... system fiber rope producer offshore technology conference polyester mooring system requirement creep polyester yarn integrity basto Presentation of OTC-30830-MS Presentation of OTC-30830-MS References References AYRES , R. , Evaluation of Advanced Fiber Ropes...

... for fuel, which involves a cement packer and adding perforation jobs in gas wells. Additionally, the waxy crude in these fields requires gas lift to be produced, particularly after water production started to escalate. This gives an opportunity to introduce through tubing electrical submersible pump (TTESP...

... The pre-drilling campaign for the Johan Sverdrup development was a key contributor to the successful execution of the first phase of the mega-project. The initial pre-drilling plan consisted of drilling six (6) oil producers, seven (7) subsea injectors and one (1) pilot target. At the end...

.... Geographic spread - how large an area can be feasibly serviced. 2. Flow Assurance - for multiple raw production streams being commingled. 3. Capacity - of not only the raw volume that can be accepted from Producers, but also processing. 4. Flexibility in operation and ease of connection to the system. 5...

... management brazil optimal reservoir management offshore technology conference brasil reservoir scenario mechanism separation producer References References Al-Maamari , R. S. , Al-Hashami , A. R. , Al-Sharji , H. H. 2015 . Development of Thermo-Gels for in Depth Conformance...

... opportunities, as well as challenges to interpret the data and to incorporate them in the reservoir models. Furthermore, the capability to produce without continuous gas flaring makes it possible to apply such approach anywhere else in the world. appraisal well petrobras injector communication...

... with a leading oil and gas producer and a third-party testing laboratory to embark on an industry-leading, first-of-its-kind fugitive emissions testing program for pressure relief valves. The valves that were subjected to this test program are the Anderson Greenwood pilot-operated pressure relief valves (Figure...

..., even in a fast track development scenario, in order to optimize productivity and sweep of the reservoir. At last, the reservoir management has already presented promising results related to the control of injected and produced fluids in FPSOs with longer production history. The steps herein presented...

... Abstract Maintaining a safe offshore operating environment is becoming increasingly difficult, as producers are pushing their equipment harder to achieve their productivity goals. In this context, maintaining the required safety environment requires a robust lubrication program that can protect...

... optimization gtp oilfield thickness drillstem/well testing salt rock reservoir characterization drilling upstream oil & gas block 18 offshore technology conference modeling & simulation block 32 permeability fault-block reservoir pi reservoir recovery producer oilfield drillstem...

... Abstract By mid-2012, LLOG Exploration Company, LLC ("LLOG") and its working interest partners (the "Producer Group") had secured leasehold interests and successfully drilled appraisal wells in the vicinity of Mississippi Canyon 254. In total, the Producer Group had identified two discoveries...

... in 2 wells and no water fingering observed from injectors to producers in this high viscosity oil reservoir. These observations supported the decision to operate the field at higher rates with current field production and injection rates above expectation providing early economic benefit from...