... for installation and dimensional tolerances, assessment of fatigue damage, and checking how the pipe sizes would impact the design. The work also provides an economic analysis to evaluate how the application of the FSIR can influence the project Net Present Value (NPV) in deepwater fields such as in the Pre-Salt...

... deposition header production system flow assurance pipe size pipe xianwei zhang hydrate management offshore technology conference experiment plug location jeong-hoon sa vertical deadleg deadleg Abstract Abstract Deadlegs are defined as pipe sections in intermittent use for production...

... (customizable options to enhance shearing performance ram capabilities and/or options for specific applications such as sour service), and testing (repeatability of shearing and durability performance, tested pipe sizes, wall thicknesses, material grades, evidence of testing, etc.). The desired outcome...

... anchoring damage is still a consideration). Potential repair solutions for a low CAPEX pipeline repair and a low CAPEX flowline repair are different. Traditionally a leak clamp and a spool piece connector set are needed for each pipe size. The project pursued a new paradigm of adapting and employing...

... value diameter maximum value offshore technology conference minimum value standard deviation operation strength pipe size wt material deviation requirement pipe spec transverse value tensile strength OTC 18947 Deepwater SCR Manufacturing Criteria R.T. Hill, EWI Microalloying LP...

... Abstract A new drill pipe size, 5-7/8 in. OD, represents enabling technology for Extended Reach Drilling (ERD), deepwater and other deep well applications. Most world-class ERD and deepwater wells have traditionally been drilled with 5-1/2 in. drill pipe or a combination of 6-5/8 in. and 5-1/2...

... intensity coefficient otc 7808 pipe size detector subsea system gamma ray technique otc 7808 member detection offshore technology conference gamma ray technique jon spencer upstream oil & gas ici tracerco calibration radiation intensity information platform OTC 7808 FLOODED...

... d OTC 1506 B. J. Harris. W. A. Mnvman and F Y <+IIaw+ II-889 Y . . . . . U-MU, 1, with the horizontal bending radius of the pipe at and the point of pipe laying is a function of the that point. This lateral force, or load, is water depth, current and pipe size, and it is con measured on either side...